4r70w companies

Brian95SVT · Mar 31, 2009

Not sure if there is a thread but, I was wondering a good company for buying a built 4r70w

I want it to be able to hold over 500hp, have a hard intermediate shaft, have a stall (maybe 3000, I'm going turboed) and has a shift kit already installed.

I saw TCI and am going to call them for a price but if any others y'all recommend please reply

DropTopPony · Mar 31, 2009

JR from on here sells them, builds them etc...

Brian95SVT · Mar 31, 2009

Ya I know JR. Haven't talked to him in forever

I was looking at Lentech. I might go with them.

97stanger · Mar 31, 2009

for my stall i went with Darrin over at BC-Auto and for my tranny I went to a buddy of my dads who lives in PA. Only charged me $1200 and thats for a completely rebuilt tranny capable of holding 600rwhp/600tq and a custom shift kit.

Brian95SVT · Mar 31, 2009

blown97stanger said:
for my stall i went with Darrin over at BC-Auto and for my tranny I went to a buddy of my dads who lives in PA. Only charged me $1200 and thats for a completely rebuilt tranny capable of holding 600rwhp/600tq and a custom shift kit.

Unfortunately I don't have a hookup. I have to buy one already built.

And bro you need to hit me up on AIM blown.

It's been forever.

Mr Jones 4.6 · Apr 1, 2009

BC-Automotive & Circle-D

Brian95SVT · Apr 3, 2009

I was thinking... Summit has the 4r70w for 1000 bucks, i could get a stall from TCI for 800ish then get a hard intermediate shaft for 160

Then take it to a local shop and get the parts installed then i swap in the trans.

Dalamar · Apr 3, 2009

I've heard a good feedback on the Lentec Trannies.
They're beefed up and well built, but You will pay for them.

That's a good price blown97.
do you know what parts were changed/upgraded?

DropTopPony · Apr 3, 2009

If not dealing with JR on here i would definitely go with BC-Automotive. Darrin is top notch! He will be doing my work most likely.

97stanger · Apr 3, 2009

yeah i HIGHLY recommend going through Darrin for atleast the converter.

I'm at school, but I have a whole list of parts that were changed out for upgrades. all i remember is a stronger input shaft obviously and something about Sun gears or something like that???

Brian95SVT · Apr 4, 2009

blown97stanger said:
yeah i HIGHLY recommend going through Darrin for atleast the converter.

I'm at school, but I have a whole list of parts that were changed out for upgrades. all i remember is a stronger input shaft obviously and something about Sun gears or something like that???

well if you could ask those guys how much it would cost to build me one and then sent it to me all ready to bolt up. then ill go from there haah.