7.5 to a 8.8?

[appleton89]

Can I use a 8.8 from a crown vic? or it as be a stang.. thanks

 

[Orange 94]

As far as I know, any 8.8 that isn't a mustang is a pain in the ass.

Go find a fox 8.8, tons of them and cheap. That what I'm using in my car.

 

[95opal]

The crown vic is longer than ours and the fox bodys are shorter, Both would require axle swaps to accommodate the sn rear disks.

 

[Phoenix0783]

Crown Vic is a different platform.

 

[full force]

Yes, crown Vic is totally different, use a fox one and swap brakes and axles over, takes no time at all

 

[330CubeGt]

Any axle from a 1979-2004 will work although there is slight different in width as the body went on the housing ends and axles changed the basic 8.8 was the same and will be a direct bolt in.

Crown vic, explorer etc etc. Internal parts swap out as the center sections are identical from ring/pinion, posi, bearings, caps etc etc.