Aftermarket Heads

[voidfinger]

Hey guys, I know this thread was on here before the switch to the new look but it got deleted in transfer i believe. Anyway, is there any truth to what I'm hearing about there being some company making or will be making real aftermarket heads for the 2v? I'm just wandering b/c I've noticed Trickflow has put a real interest in parts for the 2v... I was looking through summit and noticed a whole new string of stuff like intake, cams, timing components... just no heads yet. Any ideas?

 

[atrainsgt]

Yeah, TrickFlow is making some 2v heads. Stock for stock I believe they outflow 4v's, but don't quote me on that. I'll dig up some more info for you.

INTAKE

Twisted Wedge PI SVO
lift CFM vs. PI vs SVO
0.1 56.2 51 54 10.20% 4.07%
0.2 122.5 102 106 20.10% 15.57%
0.3 172.7 138 155 25.14% 11.42%
0.4 212.6 153 177 38.95% 20.11%
0.5 233.3 156 193 49.55% 20.88%
0.55 241 159 203 51.57% 18.72%
0.6 236.3 160 206 47.69% 14.71%
0.65 241.7


EXHAUST

Twisted Wedge PI SVO
lift CFM
0.1 42.6 49 46 -13.06% -7.39%
0.2 95.9 84 90 14.17% 6.56%
0.3 134.8 107 119 25.98% 13.28%
0.4 164.4 123 134 33.66% 22.69%
0.5 174.6 133 140 31.28% 24.71%
0.55 177.4 136 141 30.44% 25.82%
0.6 180.1 138 143 30.51% 25.94%
0.65 182.3

 

[voidfinger]

freaken awesome! so where can I look at these bad boys and when are they coming out??? do they use the standard pi cams?

 

[voidfinger]

from trick flow

[attachment deleted by admin]

 

[atrainsgt]

I read that Trickflow's dyno queen mustang made over 400rwhp with these heads... I also read they would be out this year, and as far as I know PI cams are just fine. Not sure why you would want to run stock PI cams in such pricey high performance heads though. There is a huge thread on Modularfords. Be prepared to read, its one long thread http://www.modularfords.com/forums/showthread.php?t=121612

 

[voidfinger]

when i said pi cams i ment all the cams not just stockers. I would probable run trickflow cams but i still like the vt/cush cams. I guess I'll be looking at getting these heads/intake/cams

 

[atrainsgt]

Yes, they don't require custom made cams as far as that goes. However, I read in the thread that there really isn't any cams available yet that will work that well with these heads. A couple companies are working on custom grinds to see what they can get out of them.