Auto-T5 Swap trans tunnel modification?

[94gt94]

I am looking for a picture of the shifter area of the trans tunnel from inside the car of either a 5 speed car or one that has been converted to 5 speed. I am in the process of cleaning up the floor pans before I reinstall the interior. I noticed that the trans tunnel was not cut but rather dented up in order to allow the t-5 to fit. Well this makes it so you have to pull the trans in order to change the shifter. I would appreciate a picture so I can get an idea of what I need to do. I am also trying to figure out how the lower shifter boot attaches to the trans tunnel. Thanks for your help.

 

[mustangd13]

Believe it or not, Ford put different floor pans in auto and 5-speeds. The only mod that you need to do is make the hole were the shifter comes through a bit bigger. usually you have to trim the up right hand corner and the lower right side for it to work. As for the shifter dust boot you can take 4 small self taping screws and screw it down. I have done a couple of auto to 5 speed conversions so if you have anymore question let me know and i will help as best I can

 

[94gt94]

Will I be able to clearly see whether or not the trans crossmember is from a manual or automatic. I heard that you can modify the automatic one but it isnt as good as an original manual one.

 

[mustangd13]

if it is a 94-95 car the cross members themselves should be the same the mount will be different be the accually crossmember you should be able to use