KillNThrill24
Legend
well as some may remember i was having a big issue with the overall sound of my exhuast so i bought 3in Borla XR1's from Chris and after 3 weeks on the road iv finally gotten home, ran to Summit today in my buddys cobra, and got my 3in intermediate pipes as well as Eibach Sportline's (i wanted to drop it low but not slam it)
long story short, we got the springs installed then cutout the old exhuast and installed the intermediate pipes with the Borlas attatched to them. everything looks fantastic. i hadnt planned on running tailpipes because the only 3in tailpipes are Fox pipes and im not entirely certiain everything will line up just right. i know the tailpipe hangar would need to be removed and rewelded but other than that im not sure of fitment issues. so i have the muffler and done. it sounds incredible outside of the car. but inside the car the drone is so loud its almost unbearable. under throttle it rattles your head bad lol but you can hear how muscular it sounds now.
i overall LOVE the sound over my old Flowmasters (and upon uninstallation of the Flow's shit was falling out of them and the welds had holes in them so i think it was time to replace anyways), but the drone is insanely annoying lol. any suggestions? i can possibly get some pix tomorrow, it was about 3am when we finally finished everything since we started at 10 haha so we were too tired to even think about pix.
im lowered on sportlines now, so i have the mufflers slightly angled upwards kinda into the gas tank which is most likely the cause for the drone. im thinking dynomatting the car would drastically reduce the drone but what other ideas do you guys have for me?
long story short, we got the springs installed then cutout the old exhuast and installed the intermediate pipes with the Borlas attatched to them. everything looks fantastic. i hadnt planned on running tailpipes because the only 3in tailpipes are Fox pipes and im not entirely certiain everything will line up just right. i know the tailpipe hangar would need to be removed and rewelded but other than that im not sure of fitment issues. so i have the muffler and done. it sounds incredible outside of the car. but inside the car the drone is so loud its almost unbearable. under throttle it rattles your head bad lol but you can hear how muscular it sounds now.
i overall LOVE the sound over my old Flowmasters (and upon uninstallation of the Flow's shit was falling out of them and the welds had holes in them so i think it was time to replace anyways), but the drone is insanely annoying lol. any suggestions? i can possibly get some pix tomorrow, it was about 3am when we finally finished everything since we started at 10 haha so we were too tired to even think about pix.
im lowered on sportlines now, so i have the mufflers slightly angled upwards kinda into the gas tank which is most likely the cause for the drone. im thinking dynomatting the car would drastically reduce the drone but what other ideas do you guys have for me?