Bored so i took some pics.

[94RedGt]

Heres my 94 Gt with SVE lowering springs and HP Racing Evo wheels that are 18in . Pics are not that great cuz of the camera but i think they came out ok. Still want to change some things on the exterior, i want to go wingless and swap my stock bumper for a cobra bumper and possibly a cobra hood, the one that has the two nozzles. Car needs a paint job but for now the current paint should do. Only mods are Upper/Lower cobra intake , BBK shorties with an Hpipe wich i have no idea who made it, and some MAC chamber muflers with mac tips.

 

[Gregor185]

i like it...paint the lower valance on the rear bumper and get black inserts for the rear bumper also

 

[Ferocious]

paint the lower valance on the rear bumper and get black inserts for the rear bumper also

agreed.

and i'm not really a fan of the wheels, i dont feel they belong on a mustang. other than that, clean car

 

[94RedGt]

You know the wheels are good but im i think that when money allows me that i will buy something that was made for this car, this wheels are not for a mustang so their offset is wrong and the front wheels tuck in too much and in the rear i had to use 1 inch spacers, i got them from a guy that had them on hes 03 cobra but i think they are really 350z wheels. The wheels that i really want are 17in FR500s in black with chrome lip , 17x9 front and 17x10.5 rear with some 315s on the back, till then these look fine and def better than the stockers i had.

 

[daracboy82]

Car looks great!!! I noticed in the first pic that ur car sits slightly lower on the drivers side...Mine does the same thing. Is this common on these cars?

 

[Ferocious]

You know the wheels are good but im i think that when money allows me that i will buy something that was made for this car, this wheels are not for a mustang so their offset is wrong and the front wheels tuck in too much and in the rear i had to use 1 inch spacers, i got them from a guy that had them on hes 03 cobra but i think they are really 350z wheels. The wheels that i really want are 17in FR500s in black with chrome lip , 17x9 front and 17x10.5 rear with some 315s on the back, till then these look fine and def better than the stockers i had.

i do like the red lip though. if you end up getting the fr500's, maybe mask them off and paint the chrome lip red. i dont think i've seen that before and it would probably look amazing on your car.

 

[lizwithfries]

i do like the red lip though. if you end up getting the fr500's, maybe mask them off and paint the chrome lip red. i dont think i've seen that before and it would probably look amazing on your car.

+1

Car looks awesome though! Very nice!

 

[auto_x5.0]

I actually really like the wheels, what are they?
But like stated, bumper insers, rear valance black and call it done

 

[johns94gt]

Looks good and digging the red and black look going on with the wheels!

 

[2slo95fiveoh]

I like the look. I'll echo some of the other suggestions about the rear valance, and possibly rear wheel spacers.

 

[94RedGt]

Car already has one inch spacers and i really like that the wheel is flush with the fender, and the wheels are HP Racing Evo. The rear valance is deff going to be painted flatblack to match my rear lights , i was also thinking on painting the mirrors red so it matches with the car. I need to take care of some front end damage on the rad support , the car looks like it got hit on an angle and it bend the corner of the support back and down on the drivers side , i dont think that its necessary to replace the whole rad support since its in good shape everywere else. This damage makes the car look twisted if u look at it from the front , the bumper sags cuz the whole drivers side fender is pushed down with the inner fender support when its bolted down.

 

[94RedGt]

Car looks great!!! I noticed in the first pic that ur car sits slightly lower on the drivers side...Mine does the same thing. Is this common on these cars?

The car was in a frontend crash that messed somethings , it has been to a bodyshop and it got pulled to fix the shock tower and the drivers front wheel was off by an inch back, im using some spring spacers on that side to make it a bit more even but it still sags a bit, i may think that my kmember is actually damaged and its whats causing the sag cuz the framerails look even.

 

[Dalamar]

looks great, nice pics.
the red/black combo always looks nice.

 

[cobra head]

i got to go with some of the other guys dont really care to much for the rims but its not my car but i got to say other then that the car looks really good and asfar as going with the bc fr500s very good chose