BOV which should I buy..

[rz5.0]

Now that I have an ideas were it should go what is a good one to buy that's not to expensive but its still good one.. Don't cares for the sound or how loud it is just solid and will last.. Trying to stay under 200..if possible.. Going to be running around 12 to 15 psi depending on the pressure drop of the intercooler...

 

[silverv6]

Intake pipe id say either further up the pipe or close to the bottom.. Personally mine is going to go further up closer to the manifold

 

[forcefedhatch]

It's preference really, if it were turbo closer to the turbo helps in larger compressor housings to prevent compressor surge, but yea on the intake side would be best, with a blower I would stay within about 16" from the throttle body..


Sent from my iPhone

 

[rz5.0]

Ok sounds good thanks.. Any certain distance before the maf.

 

[forcefedhatch]

Hmm.. I don't mess with a maf I run a map sensor.. I would run closer to the intercoolers output piping and at least 10" before the maf, if not that thing will buck and backfire like crazy..


Sent from my iPhone

 

[rz5.0]

Thanks again...

 

[justinschmidt1]

My BOV was mounted 5 inches past the blower outlet....

 

[97stanger]

^ Thats where I have my mondo. Just make sure its mounted between blower/intercooler and you will be fine

 

[rz5.0]

Damn ,,,, well ill just see were I can fit it better...

 

[justinschmidt1]

im assuming it doesnt really matter where its at, I just mounted it where there was already a spot on the procharger piping.

It will do the same thing anywhere and let the pressure out

 

[rz5.0]

That what I figure now.. I'm going to find the best spot after i fit the fender and bumper back on...