cam

[95bananaGT]

hey guys i was wondering wat the stock cam in a 95 5.0...and how big of a diffrence will a e303 cam make

 

[Traidmarx]

if your asking the lift i believe its .444 or .448 e cam lift is .498, as far as difference in power, depends what are your current mods??

 

[95bananaGT]

mac cai..9mm ford racing wires..msd blaster coil

 

[94kingcbra]

If you really want to make a difference, get the cam paired with a set of heads and intake manifold. If you want to dig that deep, you should make it worth it. That way you know everything is good...Good Luck

 

[OnyxCobra]

with your mods an E cam is just going to make your car suck, hold off til you're ready to do the heads and intake manifold.

 

[sbr420a]

i am running a e cam and love it but i have smoe more top end work done as well. some cars like the e cam some dont.

 

[auto_x5.0]

Not to steal the thread, but if you have a gt40(explorer) intake and gt40 heads, would an e303 do good? Or TFS stage 1?

 

[sbr420a]

i dont even have gt40 heads i have ported e7's fromt tmoss. but i am running a edelbrock intake. a cam will depend on what rpm range you want as well

 

[hottwheels04]

Im running a larger F cam which is more of a blower cam and is more top end, on a 306c.i with ported trickflow heads and intake and I like it, Wish I went with a n/a cam or custom but not bad makes good power and has alot of top end, power is strong from 3,000-6,000 rpms

 

[jam]

to add to the discussion, my car with gt40y heads, cobra intake, 75mm MAF, 65mmTB,headers/h-pipe/exhaust and tune did 265rwhp325rwtorque
I just got a explorer/cobra crate motor and am thinking of using a comp cam xe270hr with all the hardware (retainer/lifters/springs....)
what kind of gain do you think i'll get for the $$$$$ putting a new cam will take
oh BTW this for my 1995GT 5.0
any real world experience?
800$ for what 20-40hsp??!!???!!! :confused1:

 

[sbr420a]

man it isnt worth it. can just get a custom grind for a better price.