Can't ID a part.

[Monday]

My pass side, in engine bay, has an unidentified popping sound. It is soft and pops like a muffled finger snap. I am 100 percent on this being only item making the noise.

 

[apsmith49921]

That's your harness plug for the engine harness

 

[ttocs]

yea as he said that is the main harness for the engine. It is possible that something is arching to make that noise. If that is the case you will probably be able to see where it is doing this from the hot burn marks.

Now down in the pass fender there is the charcoal canister and some other crap that could also be making the noise.

 

[J_lope82]

My pass side, in engine bay, has an unidentified popping sound. It is soft and pops like a muffled finger snap. I am 100 percent on this being only item making the noise.

C106= Connector 106.
It’s a main harness connector. Make sure that bolt in the middle is not loose. Put a wrench on it. Just go snug tight.

 

[Monday]

C106= Connector 106.
It’s a main harness connector. Make sure that bolt in the middle is not loose. Put a wrench on it. Just go snug tight.

Thanks. Gonna do that right now.

 

[RAU03MACH]

i would inspect every pin on that plug for spark arc any thing that dose not look right
make sure pins are not pushing in while pushing on them for a secure fit