94 DropTop
Well-Known Member
- Joined
- Jan 3, 2007
- Messages
- 2,987
- Reaction score
- 5
Ok, so I have completed my head and cam swap. :headbang: I had everything put together and started her up. I finally got her running and was just letting her get up to temp so I could burp the cooling system. After putting the cap on I was moving the dizzy around to get it to idle better, since with a e cam its really loopy and she died. I figured owell and pulled the spout out and figure I would go ahead and time her. I go to start her and all its doing is crank. I had my roommate hit the key and i have fuel pressure, I does seem high so I was thinking about lowering it a bit. I put the spout in and had my roommate crank it and its not even trying to fire.
Any ideas guys? Its killing me to hear her run then 10seconds later she wont even crank. Im going to let here cool and see if she will fire up again. Thanks for any help guys
Any ideas guys? Its killing me to hear her run then 10seconds later she wont even crank. Im going to let here cool and see if she will fire up again. Thanks for any help guys