Clutch/trans probleum

[spdtrip]

Over the winter I had a friend-certified mechanic put a new clutch in my T5.Well it shifts great except high rpm 3rd gear shifts
and the clutch pedal vibrates during normal or fast exceleration I know its still new but something just seams off what do you guys think?
BTW the clutch is an Anderson hi-rev king cobra.

 

[Addermk2]

get under there and check your driveshaft bolts

just because he's a certified mechanic, doesnt mean he isnt human. and Humans makes mistakes!

 

[spdtrip]

I will, thanks. any thing else it might be?

 

[CC'S95GT]

Did you put a fire wall adjuster in it or an adj cable at the same time?
If yes then ck the tension on the cable. it might be too loose

 

[IceMan]

Also check your damper. They are known to go bad. Make sure the rubber ring has not "walked" on you.

 

[94RockinGT306]

it sounds like its either a loose driveshaft , bad u-joints(which will usually cause a "clunk" whenever you engage and disengage the clutch), or he put the driveshaft back in with the transmission not all tightened up and then tightened everything up and its in a bind, it should always be put in last, except for the ehaust of course. If thats not it i would pull the tranny back out and double check everything, it could be the cable or the throwout bearing.