/ Register

Coilovers

Discussion in 'Suspension and Brakes' started by RonBurgandy, Oct 19, 2014.

  1. Oct 19, 2014 #1
    RonBurgandy

    RonBurgandy Active Member

    Messages:
    838
    Likes Received:
    8
    Joined:
    Apr 4, 2012
    Location:
    Pikeville, Nc
    Anyone running coilovers on lakewood shocks/struts?


    Sent from my SCH-I535 using Tapatalk
     
  2. Oct 19, 2014 #2
    mcglsr2

    mcglsr2 Well-Known Member SN95 Supporter

    Messages:
    3,410
    Likes Received:
    25
    Joined:
    Jul 4, 2011
    Location:
    Orlando
    In my readings, I saw that Lakewood doesn't recommend using coilovers on their shocks/struts anymore. I'm not a drag person so this info needs to be double checked. I have heard good things about Strange shocks/struts though, and I do believe they support coilover applications. However, I could be wrong... :).
     
  3. Oct 19, 2014 #3
    RonBurgandy

    RonBurgandy Active Member

    Messages:
    838
    Likes Received:
    8
    Joined:
    Apr 4, 2012
    Location:
    Pikeville, Nc
    Yeah I was looking at lakewood and strange.

    Sent from my SCH-I535 using Tapatalk
     
  4. Oct 21, 2014 #4
    Caboose302

    Caboose302 Well-Known Member

    Messages:
    1,601
    Likes Received:
    1
    Joined:
    May 19, 2013
    Location:
    Dayton Oh
    Strange has a pretty good setup with coilovers and shocks and not too expensive. I've read pretty good things about them unlike the UPR where it seems to be a love or hate thing.
     
  5. Oct 22, 2014 #5
    Ferocious

    Ferocious Post Whore SN95 Supporter

    Messages:
    12,255
    Likes Received:
    592
    Joined:
    Jun 1, 2011
    Location:
    San Diego
    I have Strange on the front of mine and I can vouch for them. They have gone the whole nine yards in my stance build.
     
  6. Oct 22, 2014 #6
    ttocs

    ttocs Post Whore

    Messages:
    26,120
    Likes Received:
    2,920
    Joined:
    Oct 9, 2009
    Location:
    Evansville Indiana
    if your looking for performance check out ridetech.
     
  7. Oct 22, 2014 #7
    RonBurgandy

    RonBurgandy Active Member

    Messages:
    838
    Likes Received:
    8
    Joined:
    Apr 4, 2012
    Location:
    Pikeville, Nc
    Well I want to set up for drag racing. But when I'm not racing slam it. Anything is better than the cut stock springs I have. I can always spend a few minutes to raise them up and when I figure out where they work best I can mark them so I always know where to set them at the strip

    Sent from my SCH-I535 using Tapatalk