fogs again

SnakeBit! · Mar 9, 2018

so my son's v6 has these slats in the opening for the foglights. how did you guys take care of that to put in fogs. thanx,

SnakeBit! · Mar 10, 2018

going to assume a dremel tool will be my friend for this one.

ttocs · Mar 10, 2018

i don't think there is any trimming needed... get the lights and brackets, relay and the switch and it should all plug in I thought.

SnakeBit! · Mar 10, 2018

some of the v6's and the 01 Bullitt had the fog openings without the slats and some have slats in them. my son's has the slats.

evilcw311 · Mar 10, 2018

Donâ€™t think Iâ€™d ever seen the slats. Most Iâ€™d seen either had the lights or was just open.

Thatâ€™s interesting.

Sent from my iPhone using Tapatalk

SnakeBit! · Mar 10, 2018

yea, first time I saw them I thought.....why? was hoping my son's car would be devoid of those, but no luck.

evilcw311 · Mar 10, 2018

Yeah Iâ€™d say this is a good time for a dremel.

Sent from my iPhone using Tapatalk

ttocs · Mar 10, 2018

never noticed that myself either. I might just try a snip with my side cut wire cutters myself depending on how thick they are.

07GtS197 · Mar 10, 2018

I thought all the 99-04 v6’s had the slats. 94-98 v6’s had the black delete plate though.

SnakeBit! · Mar 11, 2018

some had the slats, some did not. have no idea what determined which car got what other than just putting on what was nearby on the shelf.

SnakeBit! · Mar 15, 2018

fogs are in/ kind of a pain. upper mounting is really hard to get to. took me forever to get one of the bolts started. I just wired them direct so they come on anytime any of the lights are put on. he likes them. got clear fogs. they do look good even off.
odd part......one side is brighter than the other. tried switching the wires to see if that did anything and it did not. I didn't pull the bulbs that came with the lights, not that I could necessarily tell if they were different or not.