fox tb swap: TPS pigtail issue

Maniak87 · May 15, 2009

so i ordered up the fox TPS pigtail for the wiring harness. i bought it from http://rjminjectiontech.com/ all the wires on it are gray, how am i supposed to know which wire gets to connected to what if they are all the same color wire...

BlkoutGT · May 15, 2009

Maybe strip a little bit off the ends to see if theres another coating underneath. other than that, I dont really know what else you could do.

Maniak87 · May 15, 2009

BlkoutGT said:
Maybe strip a little bit off the ends to see if theres another coating underneath. other than that, I dont really know what else you could do.

yea i was thinkin about doing that

EDIT: just did that, no luck :crybaby2:

dafizuck · May 15, 2009

Try to see if you can get the stock b.f and this one oriented the same and then mark the wires. Just a thought.

Addermk2 · May 15, 2009

i already told you how to solve this problem... but you need to wise up and post in a FOXBODY forum... not an SN-95

RossA81 · May 17, 2009

Just plug it into your fox TPS and match up the wire colors... super easy. If that fails there are tons of those connectors in any junkyard, easy find on 80's lincolns, grand marquis, etc.

Ross