Paladin1001
Member
- Joined
- Aug 25, 2019
- Messages
- 133
- Reaction score
- 41
When I bought the GT the trans made weird noises and the shifter vibrated badly in 3rd gear. This pic below is why. The trans was actually sitting a little crooked in the tunnel and not attached to anything except the engine. The whole car is on another plane of smoothness driving down the road now compared to how it was.
The new mount is all one piece unlike the i'm sure factory piece in three in the below pic. By the way this job can be done without dropping the exhaust. I can do a write up if anyone is interested but its really only two nuts, two bolts and the cross member bolts that need to be removed. Once the crossmember is unbolted and shifted sideways you can weasel the mount out and back after jacking the trans as high as you can get it.
The new mount is all one piece unlike the i'm sure factory piece in three in the below pic. By the way this job can be done without dropping the exhaust. I can do a write up if anyone is interested but its really only two nuts, two bolts and the cross member bolts that need to be removed. Once the crossmember is unbolted and shifted sideways you can weasel the mount out and back after jacking the trans as high as you can get it.