07GtS197
Well-Known Member
Hey guys, recently I swapped in a generic 75mm tb and ever since Ive had a hanging idle when coming to a stop. I reset the computer and checked for binding but neither had any effect. I know bbk tb's are know for this and it looks like a knock off bbk (its an ebay special) so it could have that problem too I guess. Any ideas? Im going to reinstall the tps, maybe its not sitting flat?
On a side note, Im swapping my drivers side front caliper and I have abs. Will I run into any problems bleeding the brakes afterwards? My 00 gt had the same caliper lock up after a brake install, it seems like a common problem on these cars. What causes it though? Is it the caliper itself or something else like the brake lines collapsing?
On a side note, Im swapping my drivers side front caliper and I have abs. Will I run into any problems bleeding the brakes afterwards? My 00 gt had the same caliper lock up after a brake install, it seems like a common problem on these cars. What causes it though? Is it the caliper itself or something else like the brake lines collapsing?