Reply to thread

Message: <blockquote data-quote="Duckboy4" data-source="post: 1584989" data-attributes="member: 37961">Did the key *ever* turn in the locks?  If so, then your locks are simply corroded.  Spray liberal amounts of WD-40 (or your light spray lubricant of choice) and run the key in and out many times.  Then turn the key left and right many times.  You might be able to free it up without disassembly.  Keep in mind the trunk lock only turns to the right.  If this does not free them up, removal, disassembly, cleaning, and reinstallation will be necessary.  Only in extreme cases is replacement needed.If the key you're using never worked in those locks (at least to your knowledge) it's possible the ignition lock was changed and you simply do not have the correct key for the doors/trunk.  A good locksmith should be able to get you a key that works all three for $50-100.00.</blockquote>