how much would you pay?

[ttocs]

the ink is sealed to the decal and should last for years to be honest. If there are problems later I would like to know and would take care of them.

Beside that these are $5 decals that will not hurt anything, worst case would be that they will come off. If the do let me know and I will take care of you.

 

[mygreengt]

so its just a vinyl sticker for the center cap?

 

[OnyxCobra]

yeah what exactly are we getting here?

 

[SN-95.0Beast]

If you want a larger picture of the 5.0 go to the page in the link above and click on the picture.

after some thought it has occured to me that I need to get a couple of these examples out there for others to see and report back on. If you guys want the pony one above, or the 5.0 I will sell a small run(less then 10 for sure) for $5 a set as long as you will get some good pics for me to use, give a report back and allow me to use you as a reference if someone in the future needs it. I will need to be sure that you will go through on your part so what I will do is charge $10 up front with $5 being returned after the pics and the report back. Sound fair?

I am going to be ordering the carbon fiber vinyl as well. If anyone is interested in that stuff let me know what would be a fair price for those? Again please if you are reading this please tell me if it is a good price, too much or one you could not turn down. If you have any other ideas let me know, I thought about some tri-bars, Trying to get as much info as possible.

Keep me Posted on the Carbonfiber ones, thanks!

 

[ttocs]

yes, it is just a vinyl decal that goes over the center cap. Maybe two layers of vinyl when we do the carbon fiber, or else I can print on this stuff and then seal it. I found a place that sells a solid colored reflective vinyl as well that I though could be cool along with the chrome/relfective.

 

[OnyxCobra]

if it's just vinyl then how is the ink sealed or whatever you were saying?

 

[ttocs]

as I mentioned above there are two different ways. One is a specially made clearcoat that is designed to go over the print and seal it, the other is a clear vinyl that goes over it. I have used both in the pics, you can't tell the difference between the two.

 

[94 DropTop]

So we can have anything printed on them? As long as its a simple design.

 

[ttocs]

I could put a pic of yer daughter on the vinyl if you want, or call yer ex wife a B@#$!. If you want a double layer design with an outline it might take a little time but with a full photo-ready printer ready to print on it, its up to you.

 

[ttocs]

any other ideas of designs you might like to see? Anyone like the tri-bars designs or are they too V-6 to be considered?

 

[ttocs]

so is $5 too much?!

 

[OnyxCobra]

seems pretty cheap to me...

 

[ttocs]

I thought so too and thought I would sell more then a few her for that. Suprised. My order for the new material has been held up by one of my customers not sure about what he wants or how much

 

[OnyxCobra]

my problem is i don't know what i want.

 

[ttocs]

guess everyone has that problem. I love the change it made on my wheels.

 

[SN-95.0Beast]

Can you do the carbon fiber center caps with the chrome SVT logo on them? i think that's what ive decided on. Also will it be real carbon fiber, or just a "look-a-like"?

 

[ttocs]

it is a very realistic looking carbon fiber vinyl, and it isn't cheap at 5x the price of the chrome. It is nota painted on design as much as they actually etch small lines in each direction and then clear over them to get it to reflect the same was real CF does. I got held up on my order because of one of my customers can't decide what material he wants. I have the SVT logo already made so it would ont be hard to do. Would you like me to get ahold of you when I do get it? I can make the design ahead of time to show you if you want.

 

[SN-95.0Beast]

it is a very realistic looking carbon fiber vinyl, and it isn't cheap at 5x the price of the chrome. It is nota painted on design as much as they actually etch small lines in each direction and then clear over them to get it to reflect the same was real CF does. I got held up on my order because of one of my customers can't decide what material he wants. I have the SVT logo already made so it would ont be hard to do. Would you like me to get ahold of you when I do get it? I can make the design ahead of time to show you if you want.

yeah that would be awesome, thank you

 

[ttocs]

I have a couple of people that have had me make the SVT logo to go in the tach if anyone is interested in these I already have the correct size. Because of this if we wanted we could make the svt red since I noticed your car is red. I can cut some out of regular black if you want as I am sure if you do not but them someone else would or ebay would work.