I mentioned it in the no go Rotrex thread, but thought start a new thread on what plan B is to get my eternal car project DONE!
Hellion!!!
I met with Craig last week while I was in Al's Barbeque, and got the low-down on their stuff.
They have good feedback, good parts, and build a nice kit, and they're in stock!!!!!!
So00000000000 I ordered one :thumb:
62mm Turbonetics Turbo
Ball Bearing upgrade
upgraded BOV
and the rest of their very nice intecooled kit.
the rest of the plan B package will include:
Wallburo in-tank pump / injectors
Edelbrock 4.6 Intake mainfold
Edelbrock fuel rails
Sheetmetal Elbow and TB (as pictured below)
Removal of coil backs, replaced with single coil-over-spark.
Maximum Mororsports Hellion specific K member and A arms.
Rob at Forced Air Fabrication is putting it all on and doing the tune.
He's the same Rob that did all the tuning for Tad. he's a really sharp guy.
I'm having him finish it because 1- I'm super busy, and 2- I want him to tune it.
he's probably one of the best tuners in the country.
the kit should hit his shop next week

Here's the IM and TB i'm getting, this one is powder coated black, mine will be duratuff polished look finish.
Hellion!!!
I met with Craig last week while I was in Al's Barbeque, and got the low-down on their stuff.
They have good feedback, good parts, and build a nice kit, and they're in stock!!!!!!
So00000000000 I ordered one :thumb:
62mm Turbonetics Turbo
Ball Bearing upgrade
upgraded BOV
and the rest of their very nice intecooled kit.
the rest of the plan B package will include:
Wallburo in-tank pump / injectors
Edelbrock 4.6 Intake mainfold
Edelbrock fuel rails
Sheetmetal Elbow and TB (as pictured below)
Removal of coil backs, replaced with single coil-over-spark.
Maximum Mororsports Hellion specific K member and A arms.
Rob at Forced Air Fabrication is putting it all on and doing the tune.
He's the same Rob that did all the tuning for Tad. he's a really sharp guy.
I'm having him finish it because 1- I'm super busy, and 2- I want him to tune it.
he's probably one of the best tuners in the country.
the kit should hit his shop next week
Here's the IM and TB i'm getting, this one is powder coated black, mine will be duratuff polished look finish.