Installed some new parts.

[turion94]

Installed a new BBK X-Pipe with high flow cats. Some MSD ignition tune up parts and some FRPP 9mm wires with some NGK plugs today. My stock cats were making noise and were junk.

 

[330CubeGt]

Looking good!

 

[nightfire]

MSD FTW! Made right here in my home city!

 

[Musturd]

Looks good . I have nothing good to say about msd 4 distributors and 6 digital 6 box's in the fox .... I vote junk stock distributor FTW . There wires are ok

 

[turion94]

This is my first time using MSD. Hopefully i will have a good experience. The x-pipe fitment was pretty poor. The smog pump tube has nowhere to bolt up so it's just hanging there. The rubber hose hooked to the mid pipe is the only thing holding the smog pipe in place. The stock h-pipe had a mount to anchor too. I like the sound though its pretty mean, raspy, and louder. My Mustang wants to GO now. Throttle response seems to have improved.

 

[ttocs]

I replaced my dist cap with an msd last year and its been good since.

 

[CC'S95GT]

Looks good.
Suggestion, get back under the car and rotate those clamps to 3 and 6 o'clock. Otherwise you could catch them on something in the road and rip the exhaust right back off.

 

[5-oh-MUSTANG]

Nice. I've always wondered how the stock mid pipe looked like.

 

[turion94]

Thanks guys! I guess those clamps are pretty obvious lol

 

[Randy]

Looking good.. I have all MSD on my 95 No problems

 

[the5.ohh]

Looks great like always man [MENTION=18482]Will[/MENTION] I love my bbk offroad X, sounds nice and raspy. Hate how low it hangs. How low does yours hang?

 

[FivepointSlow]

I loved the transformation in simply looks the mad Cap and rotor, coil pack, and frpp red wires made in my engine bay. Looks good!


Sent via swagPhone 5.0 using Tapatalk

 

[joekd]

Old school plug gapper huh?

Now you can cut the cats off and sell them to the local "recycling" yard and get some of your $$ back

 

[Musturd]

What you mean the smog pump tube has nowhere to hook up to ? It hooks up like normal , actually I see what your saying now never mind it's in there loose

 

[Paul]

I wouldn't get rid of that stock h-pipe. Stock 94-95 h-pipes are REALLY hard to come by these days, and worth good money. They're also great for getting rowdy combinations through emissions.

 

[Win]

I wouldn't get rid of that stock h-pipe. Stock 94-95 h-pipes are REALLY hard to come by these days, and worth good money. They're also great for getting rowdy combinations through emissions.

Very true.....keep it in the shed.

I tried to to get my 347 through with a stock h and it was a no go haha.

 

[chaos254]

You should be fine getting through emissions. I passed CA and recently NJ emissions easily with my magnaflow catted x pipe.

Sent from my cm_tenderloin using Tapatalk

 

[Dalamar]

Nice upgrades!

 

[TanTop94]

Hmm a catted midpipe that doesnt have anywhere for the air pump to hook up too. When I put in my xpipe I just cut the air tube in half and took it out along with the majority of the emissions "stuff"

 

[turion94]

Looks great like always man Will I love my bbk offroad X, sounds nice and raspy. Hate how low it hangs. How low does yours hang?

Thanks buddy! They hang a little over 4 inches from the ground.

What you mean the smog pump tube has nowhere to hook up to ? It hooks up like normal , actually I see what your saying now never mind it's in there loose

Yea, pretty much the factory h-pipe has a clip welded to it that you can fasten the smog pump pipe too. Keeps it from banging on stuff and making noise. The x-pipe from American Muscle didn't have anything to fasten the smog pump pipe and just came with a rubber hose to connect it to the cats. That's all that keeps it from hanging free which seems a little strange to me but I guess that's why they call it aftermarket. The pipe seems generally sturdy with just the hose though...

Hmm a catted midpipe that doesnt have anywhere for the air pump to hook up too. When I put in my xpipe I just cut the air tube in half and took it out along with the majority of the emissions "stuff"

I would consider removing mine but I need to pass emissions where I live. That crap sucks for changing plugs on the passenger side though... :grin: