Installing the new Exhaust this

[Nailbender]

Saterday. BBK H pipe with high flow cats and American Thunder Flowmaster cat back.
Ill post a vid when done.

Any install tips?

 

[mustangmike98gt]

have fun with the h pipe, are you doing it on a lifr or jacks and jackstands?

 

[Nailbender]

We are using a lift. Why is the h pipe hard

 

[Win]

Since you have a lift. If the bolts aren't seized it shouldn't take you more then maybe 20 min.

 

[Nailbender]

Car is a 95 with only 45,000 miles on. No rust. I am putting it on the lift Friday night and giving
all the bolts a PB blaster bath for overnight. So figure about 2 hours for the whole system

 

[mustangmike98gt]

h pipe is just a bunch of fun lol goodluck

 

[Nailbender]

Thanks

 

[pp_puncher]

when you spray the PB tap the stud with an extension and hammer, it will help penetrate.

 

[Nailbender]

all right. So why is th h pipe so hard

 

[joekd]

Buy new rubber hangers, much easier to cut them and install new ones then to fight to get the old ones off plus they are only a couple bucks

 

[Nailbender]

Good tip Thanks

 

[sn95gtvert]

the H pipe should be easy, getting the tails aligned is the annoying part.

remember to jack up the H pipe before tightning everything down it will give you more ground clearance.

 

[ARdoller]

The new. exhaust will make a. huge difference in sound the American. Thunder series catback has a nice tone. to it.

 

[RideThePONYgt]

lol mid pipes suck a mean one. good luck tho. that pb blaster really works so hopefully it shouldnt be toooo stubborn

 

[Nailbender]

I have a lift, torches and airtools. She is coming apart