is it valve tap?

GTnightrider

New Member
Joined
Feb 1, 2008
Messages
34
Reaction score
0
im wondering if i have a valve tap b/c im not sure but when i step on the pedal pretty good it makes a taping noise so the other day i change my oil and put in this enging treatment and the noise went away but the day after it came back im wondering if its a valve tap or what cause im freaking out
 

DropTopPony

Post Whore
Joined
Jan 12, 2006
Messages
15,182
Reaction score
223
Location
South Jersey
It could be but also check your spark plugs. When they are loose and about to blow out they sometimes make a tapping sound...
 

Jrgunn5150

Post Whore
Joined
Jun 29, 2007
Messages
12,273
Reaction score
2
Lol, i'm messing with you, kind of. people always seem to be in denial about knocking rods though. If you have a rod knocking, it means it's new engine time.

If it's a rod, it will happen exactly in synch with the engine rpm. If it's valvetrain related, it will only happen at half speed.

Does it happen all the time? Or just when you step on the gas?
 

Whistler98

Active Member
Joined
Jul 25, 2006
Messages
894
Reaction score
10
Location
Southwestern, Pa
What about your exhaust? The pass side header has a gasket that is known to leak and can sound like it is your motor. Have you done any mods lately? Could be a few diff things. Might not be motor.
 

humjaba

New Member
Joined
Jan 31, 2008
Messages
86
Reaction score
0
Could it be pinging / knocking? I know my engine knocks in the high rpm's when I'm in the gas if I use 87 octane =(
 

Javi

Mythic Level
Joined
Sep 8, 2007
Messages
27,321
Reaction score
57
Location
Th3 405
humjaba said:
Could it be pinging / knocking? I know my engine knocks in the high rpm's when I'm in the gas if I use 87 octane =(

mine does with 88 too but when i use 91 or 93 it goes away,does anyone knows what is going on it makes me think that the motor is gonna crap on me,please dont tell me i need a new motor? :wall:
 

Jrgunn5150

Post Whore
Joined
Jun 29, 2007
Messages
12,273
Reaction score
2
Javi, your's is spark knock, pull alittle timing out if you want to run the cheap stuff.

New guy, your's is an exhaust leak, no worries, it just sounds dumb. IMO I would leave it until I did header's or a mid pipe
 

Javi

Mythic Level
Joined
Sep 8, 2007
Messages
27,321
Reaction score
57
Location
Th3 405
J.R. said:
Javi, your's is spark knock, pull alittle timing out if you want to run the cheap stuff.

New guy, your's is an exhaust leak, no worries, it just sounds dumb. IMO I would leave it until I did header's or a mid pipe


thanks J.R. i had the feeling it was my motor about to crap :TY: :bunny3: :bunny3: :bunny3:
 

humjaba

New Member
Joined
Jan 31, 2008
Messages
86
Reaction score
0
Yeah I had a buddy ride in mine and he's like "yeah you can thank crappy california fuel for that." I put in 89 and no problems.
 

QwanSanchez

Member
Joined
Oct 4, 2006
Messages
109
Reaction score
0
Sounds like an exhaust leak to me, mine does the same thing and I thought it was valvetrain noise or rod knock too. Does it sound louder when you try to accelerate with then engine in the lower rpms say 1500-2200. Thats were mine seems to be the loudest, either that or because im running the O/R prochamber when i get above 2200 rpm it just drowneds it out. Im not sure which one it is though :wall:
 

Latest posts

Forum statistics

Threads
78,530
Messages
1,535,667
Members
16,185
Latest member
dmen76

Members online

Top