Long term WTB thread

[Rallim]

Hope I don't get in trouble for this since it says to only make a thread after 100 posts here, but I'm assuming it's okay for a WTB thread since theres one a bit further down with like 30 posts, and it's not like I can really scam someone if I'm buying right?

Anyways, basically this thread is gonna be a build list for what I've got listed for my car, and if anyone has anything sitting around they want to get rid of throw me a price! May not be right away but I'll need most of this stuff eventually I'm sure, and I'll try to keep this updated.

Polyeurathane Motor Mounts (or anything that's not solid or stock basically)
2 17x9 preferably, or 17x8 Bullitts (Purchased!)
Panhard Bar
Bumpsteer kit
Stronger front strut bar
4.10 (preferred), or 3.73 gears (Purchased!), Carbon trak lok rebuild kit, or 28 spline actual LSD
Rear tubular control arms
Momo steering wheel hub/wheel
Harness bar
BC Racing Coilovers
70MM Throttle Body
Underdrive Pulleys
E, B, F, Steeda #18, TF Stage 1 ect.... cam.
Ford Racing Black and red valve cover
GT-40 Intake
GT40/P heads, prefer ones that need a rebuild.
Good T-5 trans. (couldn't hurt to have a spare if the price is right.)
Rear Control Arms
Cobra Front Brakes
Rear Sway Bar
Camber plates
Flaming river steering shaft
Cobra hood
Saleen Front bumper
Spoilerless trunk
Less sucky headlights
1 or 1.5inch pair of spacers (Purchased!)
Manual windows

That's all I've got off the top of my head, I'll add to this once I think of more stuff I'm sure, and if there's something that you think might kind of fit in that I don't have listed, let me know! Thanks guys.

 

[chris91]

For the GT40 Heads and Intake Manifold Id hit up your local Pull and Pay junkyards. You can get the whole shebang for like $150-200. Of course youll need to have em rebuilt and upgrade the springs but for that kinda price its well worth it.

 

[white95]

How long term? I hope to complete my IRS swap this summer and will have several items you're looking for.

Oh and yes, you can have your WTB thread.

 

[Justang]

PM sent.

 

[Rallim]

For the GT40 Heads and Intake Manifold Id hit up your local Pull and Pay junkyards. You can get the whole shebang for like $150-200. Of course youll need to have em rebuilt and upgrade the springs but for that kinda price its well worth it.

Everytime I've found something with them, the heads and manifold are always gone.


And longterm as in, until the car is pretty much completely built, so however long it takes.

 

[chris91]

Find out the yards day to take in new cars. Usually theyll have a set day when they hit the auctions to pick up new stuff.

 

[white95]

Ill keep you informed but ill have the following available:

1) tubular upper/lower control arms
2) 96 Cobra rear sway bar

 

[Rallim]

Please do!

And I'll find some heads one way or another eventually, it's not too high on my to do list considering I've got just enough power for what I'm using it for now. I just need to make more smoke! Haha

 

[945.0]

its not gt40 but i have a cobra intake set and a ford racing turbo swirl head i will sell as a package deal for cheap. you would have to order one more head from summit or jegs. i have no use for them anymore i went a different route. never installed only taken out of box to make sure all was there

 

[bhorne89]

I have a new set of BBK polished underdrive pullies, going with a procharger and cannot use them, and brand new motor mounts, they are summit brand, poly, I went with a different K-Member and it uses solid mounts. Let me know if you want more info! Thanks

 

[Mustanger]

I have a brand new in the box Ford Racing 3:73 gear set I'm not going to need.

 

[Rallim]

its not gt40 but i have a cobra intake set and a ford racing turbo swirl head i will sell as a package deal for cheap. you would have to order one more head from summit or jegs. i have no use for them anymore i went a different route. never installed only taken out of box to make sure all was there

Let me know what you want for the intake, don't think I could use the head. Trying to keep it within a budget, and the price of one head new is too high for me.

I have a new set of BBK polished underdrive pullies, going with a procharger and cannot use them, and brand new motor mounts, they are summit brand, poly, I went with a different K-Member and it uses solid mounts. Let me know if you want more info! Thanks

Yes please, send me a PM with what you want for them

I have a brand new in the box Ford Racing 3:73 gear set I'm not going to need.

Might have a set of 4.10's, If not I'll let you know.

 

[Javi]

I have cobra brakes, BNIB 3.73 gears.

 

[bhorne89]

Rallim,
send you a pm with the links to the parts and price, thanks and let me know.

 

[945.0]

350 shipped for the intake set sound good

 

[sleepn_sn95]

Ive got an F cam Im looking to sell