Modular Garage Sale......

[Bullitt5339]

Cleaning out the shop and need to get rid of some parts to make some space. I will update as I get more parts ready to go. All prices do not include shipping or PP fees.

Compucar Fuel Rail tap. Has a fuel pressure cutoff switch attached and I'll leave it on there for the sale. Needs new O-Rings, which are .10 cents each at Autozone. $10

Stock Bullitt air intake tube. Just needs a good cleaning..... $20

Complete Airbag set with control module from my 2001 Bullitt. Dark Charcoal in color $200

Cobra/Bullitt ABS Pump and bracket. $100

PI heads with valves, springs and retainers. No cams. They need a cleanup before they could go on the car. $50 picked up, $80 if I need to ship them.

Canton Modular windage tray with studs. $40

Factory 2001 hydroboost. In perfect shape. $100

2001 Bullitt rear brake setup. Calipers not pictured, but included. Calipers have been ground slightly to clear 15" wheels. Has one sticky slider pin that would need to be cleaned up. $150

Stock Romeo timing cover. Bought as a spare to have powdercoated and never did. $50

1994 Cobra rear swaybar. Probably the largest stock swaybar that came on a Mustang. $50

 

[asohagan]

Pm me the shipped price on the abs pump to 73130

 

[Bullitt5339]

PM sent.

 

[Musturd]

Mmm hydraboost

 

[Bullitt5339]

Mmm hydraboost

Yeah, I was going to throw it in the scrap metal pile, but I figured there's some guys who would love to do the swap for cheap and not have to worry about vacuum for their brakes.

 

[duff daddy]

If you sell those heads let me know, I have a nice set of pi cams I was thinkging about of buying them but I think I would like to go with the NPI combo next

 

[Bullitt5339]

The entire WAP engine with timing cover for the Mustang will be For Sale within the next few weeks Duff.....

 

[19mustang95]

Wouldn't the bullitt rear brake setup need the rear caliper bracket since the GT/V6 ones are different from the Cobra/Mach/Bullitt ones? I could be wrong, but i know the cobra ones are different.

And does the bullitt intake have a hole for the iac or do the bullitts have the integrated MAF/Iac? Definitely interested in it.

 

[Bullitt5339]

I'm not sure on the brackets for the calipers.

The stock Bullitt intake tube does have the hole for the IAT sensor. They had separate MAF/IAT.

 

[benjig13]

How much for the windage tray and sway bar shipped to 27343?

 

[TurboDSM]

So the heads have everything but cams, lifters, and pushrods?
Also, are they Romeo heads?

 

[Bullitt5339]

How much for the windage tray and sway bar shipped to 27343?

$50 for the windage tray. I will check on shipping for the sway bar.

So the heads have everything but cams, lifters, and pushrods?
Also, are they Romeo heads?

You are correct. Except 4.6's don't have lifters or pushrods, they're built into a single piece called a lash adjuster.

 

[TurboDSM]

You are correct. Except 4.6's don't have lifters or pushrods, they're built into a single piece called a lash adjuster.

I had a brainfart, lol.
Can you pm me pics of the heads and valve faces? Thanks.

 

[Bullitt5339]

I will try to stop by the shop and snap a couple pics on my way home from work tonight.

 

[TurboDSM]

I will try to stop by the shop and snap a couple pics on my way home from work tonight.

Alright, thanks.