New UPDATE ( Vortech BLower INstall )

Mrstangerbanger · May 28, 2011

The car is a 95 Gt Vert that has 89,000 miles on it and runs great

When I got the car it was ugly as hell and I really have done so much to make this car look like it does ...

This is a short story of some of the stuff I have done to my car.....

It had these ugly a*s wheels when I got it

I then got the car lowered

I then got the styling bar

Got new Wheels and brand new top with glass rear window

Car looked lots better with new wheels and good detail (OLD paint Job was a single stage)

build Custom stereo system for the car

Sound Deaden the car front to back

Took first place at my First SQ Comp at MECA with a Vert Mustang (Scored an 80 ) Super high score

New Seats

New Paint job and Headlights

Cobra O.E.M front bumper

New Trickflow Heads,Intake and bolt ons

The car is my baby and I'm really trying to build a good daily driving 12 sec Vert. The car already has gears and all the little bolts ons so I'm really hoping that doing the H/C/I will make a big difference ....

I'm buying all the parts I need and should have everything ready to go very soon ...

Raffaelli · May 30, 2011

Re: MR Stanger Bangers 95 VERT

Nice work man. :thumbsup:

JoshHooten · May 30, 2011

Re: MR Stanger Bangers 95 VERT

how much the paint run you looks great man ive been thinkin about some saleens

rio red 95 vert · May 30, 2011

Re: MR Stanger Bangers 95 VERT

Nice work it is looking great!

Mrstangerbanger · May 31, 2011

Re: MR Stanger Bangers 95 VERT

paint job cost me $3,000 and took 2 times to get it right

Body guys suck ass

JoshHooten · Jun 1, 2011

Re: MR Stanger Bangers 95 VERT

paint and wheel combo is perfect love the color

boosted93 · Jun 7, 2011

Re: MR Stanger Bangers 95 VERT

Ha when i seen the first set of wheels "wanna be a baller" song popped into my head! Looks much better man.. How do you like that cobra bumper vs the gt one? I swear the cobra one seems to sit lower in all the pics i see

Sinned83 · Jun 7, 2011

Re: MR Stanger Bangers 95 VERT

great progress

Mrstangerbanger · Jul 6, 2011

Re: MR Stanger Bangers 95 VERT

So the build begins

I will be installing the H/C/I this weekend and will make sure and post sh*t loads of pictures for everyone

Here is a update of everything that is going onto the motor

Stock bottom End with low miles
TrickFlow 170 cc Heads that have been ported and polilshed like crazy HUGE
Ford SVO 1.6 RR
Ford Foxbody Chrome Valve Covers
Schneider Custom Cam
TrickFlow Track Heat INtake also ported to 1262 gaskets
BBK Shorty Headers
ARP Bolts
BBK 70mm T/body
Al new Gaskets
373 Gears
Aluminum Drive Shaft
Underdrive pullys
cold Air intake
3 core Mishimoto Radiator
24Lb injectors (Will upgrade to 30LB injectors with and start with 75 shot first )
Trickflow Nos Plate and 75-300 shot of NOS
BBK Fuel Regulator

I'm Sure there is lots more but that is all the New parts going onto the car this weekend so its going to be a long weekend lol lol lol

IM going to smog the car this week before the build that way I can have 2 years to get the tune clean enough to smog

I cant wait to let you guys know what the motor make s
http://schneidercams.com/278-84RHsbfhydroller.aspx

itsblue95 · Jul 6, 2011

Re: MR Stanger Bangers 95 VERT

keep us updated since mine and your will be about the same except i have the holley systemax intake and AFR185cc heads

Mrstangerbanger · Jul 21, 2011

Re: MR Stanger Bangers 95 VERT

So I started taking the motor down at about 8.30 am and had the motor down to the short block within 6 hours. It not pretty looking but i figure i would post some pics to show you guys the H/C/I swap

Because I own a detailing business I detail cars for most of the car lots here in my area so I was lucky enough to have one of the car lots let me do the work at there business so I have the best tools and help if needed ...

Had to loosen up power steering pulley to get the last bolt holding the bracket

I have a lot of work to do

Does not hurt that they have over 100,000,000 dollars worth of Snap on and Matco Tools there to use if I need anything ..... :headbang:
all have more pics soon

ProKiller · Jul 22, 2011

Re: MR Stanger Bangers 95 VERT

good progress so far. only thing i would change with that combo is the throttle body/elbow. the trickflow intake has a 75mm opening so get the tb/elbow to match that.

JonBeast · Jul 22, 2011

Re: MR Stanger Bangers 95 VERT

SWEET...gonna try to hide any wires/shave anything while you're ripping it apart?

miss2slocoupe · Jul 22, 2011

Re: MR Stanger Bangers 95 VERT

WOW jus wow.... it has came a LONG way!!! great job!!!

itsblue95 · Jul 22, 2011

Re: MR Stanger Bangers 95 VERT

Good luck man hope it runs good

Mrstangerbanger · Jul 22, 2011

Re: MR Stanger Bangers 95 VERT

OK so little update I finally pulled the cam and timing cover off and started to get the car back together ...

The motor was a rebuilt motor because all the gaskets were felpro and the cylinder walls had no lips and look great. The timing chain was aftermarket and the heads were rebuilt...

Also is this what a stock 95 piston look like??