OP
OP
98snakehorse
Well-Known Member
Mustangs are growing like weeds in my shop.
Nick's 98gt Full Budget Built Turbo 2v
- Thread starter 98snakehorse
- Start date
1998cobrasvt
Well-Known Member
- Joined
- May 4, 2015
- Messages
- 1,531
- Reaction score
- 10
Great shots.
OP
OP
98snakehorse
Well-Known Member
Great to hear, post up some dyno runs when you get that done! Looking forward to see what you make.
On another note... got some great shots from the second outing of drag racing. Getting my 60ft down a little better airing down these 555rs to roughly 17psi. Will more than likely be replacing these with a set of Mickey Street Pro Radials.
mustangmurley
Active Member
Great to hear, post up some dyno runs when you get that done! Looking forward to see what you make.
On another note... got some great shots from the second outing of drag racing. Getting my 60ft down a little better airing down these 555rs to roughly 17psi. Will more than likely be replacing these with a set of Mickey Street Pro Radials.
She's looking good!! Have any video??
Sent from my iPhone using Tapatalk
OP
OP
98snakehorse
Well-Known Member
Unfortunately no. Wife has been too busy to come along this year and would normally have her take a quick vid. Maybe next time though
mustangmurley
Active Member
Ahh still nice to see that thing out burning up some rubber!! Curious to see it make a pass!
Sent from my iPhone using Tapatalk
OP
OP
98snakehorse
Well-Known Member
Heard the vid of it running on your thread. Sounds great! New goals is to go intercooled, blow thru maf and open atmospheric bpv. lol
Same here.... [MENTION=11461]1bad95[/MENTION] ruined us both lol
OP
OP
98snakehorse
Well-Known Member
Had a friendly grudge race this week against a buddy with a coyote gt. He has boltons, tune and Mickey ET Pro drag radials... I say the ole 2v did its job.
[video=youtube;L3xUl-PmtG8]https://www.youtube.com/watch?v=L3xUl-PmtG8[/video]
Here is the end of the race.....
[video=youtube;eNehB9NBTU0]https://www.youtube.com/watch?v=eNehB9NBTU0[/video]
[video=youtube;L3xUl-PmtG8]https://www.youtube.com/watch?v=L3xUl-PmtG8[/video]
Here is the end of the race.....
[video=youtube;eNehB9NBTU0]https://www.youtube.com/watch?v=eNehB9NBTU0[/video]
OP
OP
98snakehorse
Well-Known Member
Most definitely. Beings we make roughly the same hp and my car being substantially lighter. We race quite a bit at the local 1/8th track and I've always ran better times than him but he thought he would have a better chance against me on the street due to my tire choice. Lucky for me these 555rs hook very well on the street surface compared to the track.
OP
OP
98snakehorse
Well-Known Member
Got my ass handed to me by a built/turbo'd ws6. His car is making around 700+ to the tire on this run.
[video=youtube;Pa0DztlV67M]https://www.youtube.com/watch?v=Pa0DztlV67M[/video]
[video=youtube;Pa0DztlV67M]https://www.youtube.com/watch?v=Pa0DztlV67M[/video]
mustangmurley
Active Member
You're quick out the hole every time. You running 4.10s under there?
Sent from my iPhone using Tapatalk
OP
OP
98snakehorse
Well-Known Member
Its got a 3.73 in it now. When I switch over to the yukon 31spline diff and axles im going to swap it out for a 3.55
OP
OP
98snakehorse
Well-Known Member
Front mount mockup begins!
That thing looks slick. Im glad to see you making some progress on it.
mustangmurley
Active Member
What kind of gains do you expect? Btw your engine bay is looking sharp as hell that wire tuck makes a big difference.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
