Oil Pressure Guage Sender question

[soldiercj]

I am putting an after market gauge and sender on the car but need to add a T fitting to expand the space between it and the pump beside it. The stock sender bolts straight in, but the after market sits upright. What size of fitting will I need? Its for a 97 4.6L 2V SOHC

 

[ivan12]

Not sure if yours is the same as the 94-95s if it is then just go to your local home depot and play around with some fittings until you can find the right setup that will fit in the space you have provided. This is what I did

http://sn95forums.com/showthread.php?46321-hooking-up-gauges/page2

 

[vermilion]

3/8 brass coupler and Tee. you're welcome.