OK guys! You asked for more, so here they are!!

Win · Jan 17, 2009

That's A GREAT build props on it. Looks and sounds great. I would def enter it into a show.

US Soldier(stang 98) · Jan 21, 2009

Nice work bro i give that V6 mad respect. love the HP put out. no many people do up a V6. Good luck with the 1/4 mile time.

hottwheels04 · Jan 24, 2009

$2BURN said:
Here are my mods. I was sure if I should post them here or somewhere else.

1996 4.2L Built, Blown and Stroked V6
MUSTANG MODIFICATIONS

Body
Body work / paint by Red Star Auto Works, Sacramento
Mach III Ram Air SVO Hood
Headlight Set w/Black Housing Cobra Style
Saleen style side skirts
Saleen style wing
Saleen style rear bumper cover
Cobra style front-end bumper with spoiler
Aerocatch Plus Flush hood latches
Short antenna
Custom Emblems / Supercharged
Engine
Custom engine built by Speed Freaks Industries, Tracy
Vortech Supercharger V-2 SQ @ 13 psi
48LBS Fuel Injectors
4.2 Steel crank
BBK Valve Covers
SCAT Forged H Beam Rods
ARP Rod Bolts
Wiseco Custom Forged Pistons
Enhanced Girdle / Oil Pan / Stick-tube
Ported Upper and Lower intake
Stage 3 Heads
Custom Camshaft
Full Roller Rockers
Hardened Pushrods
Lightning MAF and Intake adapter
Snow performance Methanol Injector
Operation and Low Level indicator lights for Methanol
Cometic Hi-performance Custom Head Gasket
JBA Power Cables
Vortech Supercharger pulley
SCT Excalibur II Flash Tool
Optima RedTop battery
Dyno Tuned / Final pull #'s below
At Motor 503 HP 527 FtLbs Tq
Rear wheel 402.9 HP 422 FtLbs Tq
Wheels / Brakes
Hotchkis Camber Plates
Eibach Pro Kit Springs and Dampers
Bear Claw HP Front and Rear Calipers and Rotors
18X8 TSW Thruxton Hyper Front wheels
235/40R-18 95Z Toyo Proxes
19X9.5 TSW Thruxton Hyper Rear wheels
275/30R-19 96Z Toyo Proxes
Transmission / Exhaust
Ford Racing 4.10 gears
Ford Racing Posi-traction
Spec Stage II Clutch / Flywheel
BM Ripper Short Throw Shifter
23 Tooth Speedo Gear
2" Flow Master Dual H pipe exhaust
Catalytic convertor
Interior
Dual gauge A-Post
AutoMeter Boost / Fuel pressure gauges
Center console from 1998 Mustang with cup holders
Corbeau LG1 Suede Racing Seats
Stiffeners
AutoPower 4 point Roll Bar with Removable diagonal and harness supports
BBK Strut Tower Brace
Maximum Motorsports Sub-frame Connectors
All stiffeners powder coated black
:tongue3:

Very nice v6 man and isane power esp for a sixer!! :headbang:

ccasion14:

But how is it making 500 crank hp and putting down 400?, theres no way ur getting a 100 rwhp loss through ur drivetrain, its usually like 10-15% loss in power between flywheel and rwhp that doesnt make any sense more like 450 crank hp and 400rwhp if anything...? :dontknow:

hottwheels04 · Jan 28, 2009

I like ur license plate btw!

$2BURN · Jan 28, 2009

95gtjeff said:
I like ur license plate btw!

Thanks bro. That thing took 22 weeks to get from the DMV out here. Ahh! California such a well run place...

94darkhorse · Jan 28, 2009

Why did it take so long for the plates to get approved? I like them BTW.

Dalamar said:
How bout Vegas? :tongue3:

No! :nono: In the middle because it would be in Iowa, so I could get to see all 3 of these cars in person! :notworthy:

Dalamar · Jan 29, 2009

Where the heck is Iowa? :huh:

quik67mustang · Feb 4, 2009

when am i gonna see your car at some local shows?

its always nice to have a fellow sixer to mingle with!

$2BURN · Feb 28, 2009

Mystikal said:
Why did it take so long for the plates to get approved? I like them BTW.

Dalamar said:

How bout Vegas? :tongue3:

Click to expand...

No! :nono: In the middle because it would be in Iowa, so I could get to see all 3 of these cars in person! :notworthy:

Have you heard how California is run these days! I was glad to see these is so quick! LOL From what I understand there are going to be so many government cuts in the next year or so. Good luck to those who want to order a plate now.

$2BURN · Feb 28, 2009

Mystikal said:
Why did it take so long for the plates to get approved? I like them BTW.

Dalamar said:

How bout Vegas? :tongue3:

Click to expand...

No! :nono: In the middle because it would be in Iowa, so I could get to see all 3 of these cars in person! :notworthy:

And actually they were approved instantly on the DMV website. As long as it was available and you paid the $40. Just getting them made and sent to me to a long time.

$2BURN · Feb 28, 2009

quik67mustang said:
when am i gonna see your car at some local shows? its always nice to have a fellow sixer to mingle with!

Dude, keep me posted! I would love to get this thing into some shows. I have only done one so far in Livermore, Ca. It was pretty sweet. I ended up drinking beer all day!

ccasion14:

$2BURN · Mar 28, 2009

Just ordered a rear seat delete. i thought about upholstering the seats, but I just doubt anyone is going to ride back there. Making my light car even lighter! LOL

From what I understand, these are simple to install. I will post pics as soon as its in!

CruizinKev · Apr 14, 2009

Hey I just see you got the BAER brakes on front. Do you know something about these? I also got the same looking calipers laying. How your calipers mounted on the car? stock spindles? those are 13" rotors? is the BEAR thing the same like the 13" cobra??