pi cam swap help needed

[93PGT]

i have the passenger side done. and the driver side is out. now i am running into a problem. how do i get the gear onto the cam because it didnt slide off all the way like the other side. please help what order should i try to reassemble everything in. thanks

 

[Red 97]

The driver side seemed the easiest for me. Since the keyway should be facing more towards the bottom its easier to line up. snug down your cam bearings, rap a rag around the middle of the camshaft and put some vice grips on (tight) so you can rotate the camshaft and hold it were it needs to be. Get the keyways lined up lift up on the gear and tap it on with a mallet.