Okay,
i have a popping sound from the front end.
it occurs when:
going over a pot hole (specifically heard it when hitting a pot hole with the drivers side wheel)
going over a speed bump
coming to a stop
going off a curb
current problems with the car:
missing 1 lug nut off drivers rear
bad universal joints (already ordered new ones)
bad passenger shock (i think... it has oily residue on it)
has a high mileage steering rack (180,000+)
modifications to suspension:
solid steering shaft
used 99 cobra steering rack (180,000+ miles)
BBK Gripp springs
used tokico shocks (pssenger side might be going out)
cobra a-arms
prothyane bushings (everything except a-arm bushings)
prothyane isos
MM CC Plates (had to re-drill the passenger side due to inaccurate measuring)
drilled rotoers
new pads
lower sway bar end links
strut tower
MM bump steer kit
MM Solid motor mounts
stock:
sway bar
steering spindles
wheel bearings (130,000 miles)
things you should know:
makes an odd sound when disengaging my clutch. (pop sound, but i think its different)
i dont know how tight to make mysway bar end links.
have an aftermarket clutch quadrant and clutch
i have no idea. i took the wheels apart and re-set the springs to ensure they settle properly. now i dono what to start with. replace the shock? anything chepper?
i have a popping sound from the front end.
it occurs when:
going over a pot hole (specifically heard it when hitting a pot hole with the drivers side wheel)
going over a speed bump
coming to a stop
going off a curb
current problems with the car:
missing 1 lug nut off drivers rear
bad universal joints (already ordered new ones)
bad passenger shock (i think... it has oily residue on it)
has a high mileage steering rack (180,000+)
modifications to suspension:
solid steering shaft
used 99 cobra steering rack (180,000+ miles)
BBK Gripp springs
used tokico shocks (pssenger side might be going out)
cobra a-arms
prothyane bushings (everything except a-arm bushings)
prothyane isos
MM CC Plates (had to re-drill the passenger side due to inaccurate measuring)
drilled rotoers
new pads
lower sway bar end links
strut tower
MM bump steer kit
MM Solid motor mounts
stock:
sway bar
steering spindles
wheel bearings (130,000 miles)
things you should know:
makes an odd sound when disengaging my clutch. (pop sound, but i think its different)
i dont know how tight to make mysway bar end links.
have an aftermarket clutch quadrant and clutch
i have no idea. i took the wheels apart and re-set the springs to ensure they settle properly. now i dono what to start with. replace the shock? anything chepper?