Progress: Beginning reassembly

[delling3]

In the midst of a PI cam and intake swap. I have finally made enough progress to begin reassembly. I've had a roadblock or two along the way, but I started putting stuff back together today. Hoping to have the car back on the road before too much longer.

My question is order of reassembly. I have the cams installed, but have yet to reinstall the valve covers. Coil packs are still off. I also still need to install the manifold. From a reassembly point of view, is it easier to reinstall the valve covers/coil packs, etc before the manifold? Or vice versa? Thanks in advance.

Chris

 

[weendoggy]

imo, put either the manifold on or at least put tape over the intake/head runners. You may thank yourself later.... Coil packs/injectors after the manifold is on.