FinnCobra
New Member
Car is 1994 white Cobra, old drivetrain sold long time ago. I got totaled Mach1 for parts but I got scammed. Car has been in parts about two years now. But now I have most of the parts.
I have rebuild iron block, similar parts than in 03 Cobra. This week I'll get Eaton m112 with some parts. Current plan is to assemble the car NA because I need to get lower manifold and intercooler, and I need to get some savings first.
I have made irs swap few years ago, I have decent chassis. Subframe connectors, stiff bushes, bilstein, original brakes with Russel lines.
Before I can add the charger I must upgrade fuel pump. I have returnless system, and I plan to use either Mach1 or Terminator ecm. I have Quarterhorse and I have made several tunes for different Mustangs. HP goal is under 500, I have 47 lbs injectors.
I have rebuild iron block, similar parts than in 03 Cobra. This week I'll get Eaton m112 with some parts. Current plan is to assemble the car NA because I need to get lower manifold and intercooler, and I need to get some savings first.
I have made irs swap few years ago, I have decent chassis. Subframe connectors, stiff bushes, bilstein, original brakes with Russel lines.
Before I can add the charger I must upgrade fuel pump. I have returnless system, and I plan to use either Mach1 or Terminator ecm. I have Quarterhorse and I have made several tunes for different Mustangs. HP goal is under 500, I have 47 lbs injectors.
Last edited: