rear end

yanivFS

New Member
Joined
Jul 3, 2012
Messages
26
Reaction score
1
Location
israel
dose the 99-04 rear end is a direct bolt on for a 96 v6?
i found a 00 cobra rear end that will be graet for my turbo project so i wanted to know if will fit.
after i replace the rear end the driveshft that i need will be the same as the gt\cobra correct?

thank you

yaniv biron
 

ivan12

Well-Known Member
Joined
Dec 4, 2007
Messages
2,427
Reaction score
40
It will be a direct swap but it's a tiny bit wider, less than an inch on each side if I recall
 
OP
OP
Y

yanivFS

New Member
Joined
Jul 3, 2012
Messages
26
Reaction score
1
Location
israel
thanks everyone.
ill take it, it comes with the rotors and callipers.
what driveshaft i will need to fit it with the 4r70w tranny?
the gt tranny from 94-04 is the same moddel but diffrent program will be needed as far as i know...correct?
i will uploud some pics of me turbo v6 project soon and ill open a new thread with the questions ill probobly have on the way with pics and all.

thank you all

yaniv biron
 
OP
OP
Y

yanivFS

New Member
Joined
Jul 3, 2012
Messages
26
Reaction score
1
Location
israel
i checked again and its not 00.
i have 3 options to chuse from:
1. 96 gt
2. 99-04 gt
3. 04 cobra

thay all come with 3.27 and traction lock, accept the 96 that comes with 2.73 and non traction lock i think.

thanx
 

rz5.0

Legend
Joined
Mar 26, 2010
Messages
5,853
Reaction score
132
Location
Great state of TEXAS
Your drive shaft now would work.. Just need a conversion U joint... Bend some brake lines.. Drill 4 holes.. That's it if it's complete...
 

MustangChris

Mythic Level
Joined
Aug 20, 2008
Messages
27,282
Reaction score
951
Location
Aurora, CO
he proabably mis-typed.... either way... could be an export cobra or an R.. . ..

did the R come with IRS or SRA??
 

Latest posts

Forum statistics

Threads
78,527
Messages
1,535,651
Members
16,185
Latest member
dmen76

Members online

Top