Rear Quarter Panel??

[SilverStanger01]

I noticed the other day my driver side rear quarter panel is starting to rust. I looked all over the internet but I couldnt find one.. Does anyone know where i could get a new one? or is Junk yard my best bet??

 

[Justang]

I'm thinking junkyard if eBay and Craigslist come up empty.

 

[bredman]

I did some looking but came up with nothing have you check on geting one thru ford that met be your only opintion or a junkyard

 

[duff daddy]

you would patch a new piece in not repalce the whole quarter.

 

[bonestock3.8DTH]

yeah but dang you're car is already rusting? dang that sucks

 

[2slo95fiveoh]

you would patch a new piece in not repalce the whole quarter.

X2.. patch the rusted piece and get that area blended to match.. Removing a quarter panel is a PITA.

 

[stevec2004]

You can buy them new but very expensive http://www.teamfordparts.com/partlocator/index.cfm?action=getJointLocator&siteid=214270&chapter=&Sectionids=0,2769&groupid=51899&subgroupid=2769&componentid=0&make=10&model=Mustang&year=2001&graphicID=JC99672&callout=1&catalogid=2&displayCatalogid=0

 

[SilverStanger01]

Yeah im from Ohio and we use a lot of salt on our roads during winter.. I want to find a beater car to drive but right now im not in any position to buy one. This kind of job is definitely going to have to wait until i have some money..and any and all body blemishes, ill just fix them all at once.

 

[eyespi37]

Hi There,

Can anyone point me in the right direction in regard to locating pictures or a video how to on the removal of an SN95 Mustang's rear Quarter Panel? In a lot of the forums I see people giving little tid bits of what needs to be done, but I want to do this myself and I see no illustrations or manuals on how to begin the process and locate the weld spots to be drilled out, etc...

Any information that you can provide is greatly appreciated! After I get the driver side rear quarter panel removed, and the new one painted and put on, I intend on installing a CNG kit into her over the next year. When that project comes to fruition, iwill post the results!

eyespi37
1998 GT 4.6

 

[94Pro-5.0]

you would patch a new piece in not repalce the whole quarter.

X2.. patch the rusted piece and get that area blended to match.. Removing a quarter panel is a PITA.

this is what you need to do