Rocker Studs

[Euroeater95]

Have any of you ever had a problem with your rocker arm studs snapping off. Turns out that the miss that i thought was ignition related was really just a valve that wasnt opening because the rocker stud snapped off. I replaced that one with a new one and last saturday another one broke on my way home from work.

 

[vettekiller3]

Are you running a stock cam?

 

[Euroeater95]

No I have a Comp Cams XFI Stroker cam.

SPECS: Duration 286/300, Duration @.050 236/248, Lift .579
1.6 Roller Rockers
Double Valve Springs
Comp Cam Magnum Pushrods

 

[vettekiller3]

so im guessing your not running stock heads. id suspect its probably your pushrods. check the length with a solid lifter. that kept happening to my buddies 347 turned out his pushrods were just alittle too long.

John

 

[Euroeater95]

Yeah i have TFS Twisted Wedge, There is rub marks on the top of the valve and it is perfectly in the middle. I need to see if i have coil bind, that could be the root of the problem.

 

[NVH]

What kind of rockers are they? I've had a problem with the C-clips on Dove stud-mounted rockers breaking (cost me two oil pumps after the broken clips fell down into the pan and got sucked up). I've got Edelbrock heads.

 

[Euroeater95]

I am running Scorpion Rockers, but all of those are fine. Its the studs that keep giving me hell

 

[vettekiller3]

check your pushrod legnths bro!

John