SOLD, Pistons, cam, heads

[Daryl]

I don’t know if anyone would even be interested in any/all of these 3, but it’s what I got back so far from the engine builder. All 3 are out of my ‘95 SVT Cobra 5.0 with 92k on the odometer.To the best of my knowledge the cam and pistons are stock. Probably the water pump too, I imagine.

 

[Daryl]

Oops, here’s the cam:

 

[Daryl]

 

[Daryl]

Is this all pretty much junk? Or could someone possibly use/want it? I’m not an engine builder so I have no idea what’s reusable and what’s s trash.
Let me know... thanks!

 

[Wmac]

Daryl: Hang on to the w/p pulley, never know when you may what to run stock size pulleys. Where is the stock crank pulley?

If you were closer, I would offers some bucks for the cam. It is worth something to someone just as a stand alone item.

 

[Daryl]

Daryl: Hang on to the w/p pulley, never know when you may what to run stock size pulleys. Where is the stock crank pulley?

If you were closer, I would offers some bucks for the cam. It is worth something to someone just as a stand alone item.

Not sure where the stock crank pulley is. I’m guessing at the engine builders. Has a new harmonic balancer on it though

 

[Daryl]

Water pump,pulley is going back to the shop today. But.... I have some more pics of the crank and heads if anyone’s interested.

 

[Daryl]

Buehler? Buehler? Frye???....

 

[Daryl]

Water pump went back on, so it’s out of the picture. But my original cast iron cylinder heads are available if anyone is interested in an OE set with only 92k on them?

 

[RAU03MACH]

I have a bunch of original cylinder heads around
The only people looking for them are people who want to go back to stock
I get one or two people asking

 

[RAU03MACH]

Used Cams
usually I give them to a guy that makes art out of them

 

[RAU03MACH]

Someone will pick up the rods
Craigslist or offer up

 

[RAU03MACH]

Is the guy cutting the crankshaft
Or is he replacing it , if you are having it stroked
The crank will sell pretty quick if it's never been turned

 

[Flade]

If the Heads are GT40 3 bar heads they will definitely sell. They are a nice improvement for a stock 5.0L

 

[RAU03MACH]

3 bar are hard to find
I had a set on my 92 gt I ment to pull them off, but failed

 

[RAU03MACH]

https://elpaso.craigslist.org/pts/d/el-paso-ford-gt40-cylinder-heads/7291041802.html
3 bar

 

[Daryl]

If the Heads are GT40 3 bar heads they will definitely sell. They are a nice improvement for a stock 5.0L

They are

 

[joemomma]

So the 3 bar GT40 will fit "SN95" headers and don't have the spark plug issue the GT40p have, correct?

 

[Daryl]

So the 3 bar GT40 will fit "SN95" headers and don't have the spark plug issue the GT40p have, correct?

Joemomma,
I have no clue about header fitment, etc. Sorry. I’m too new to this car.

 

[joemomma]

Joemomma,
I have no clue about header fitment, etc. Sorry. I’m too new to this car.

No worries man - I'll do some Googling
EDIT: my Google-foo says the 3 bar GT40s are straight spark plugs, not angled like the GT40p.

I know they are heavy - any idea on shipping to 38506? It may not be worth it due to the shipping costs, honestly. Freight is an option for me if that helps any, I can have them shipped to my work.