bailey_57
New Member
- Joined
- May 29, 2013
- Messages
- 33
- Reaction score
- 0
I will try to keep this brief and explicit. I removed the starter from my cobra. took it to autozone and purchased a new lifetime warranty unit. What do the the two wires do? The large ring connector is red, and I'm not sure where it comes from. I'm used to the one wire from the solenoid setup on my previous foxes. Also, this new starter has a crimp style connector(don't know what the technical name is for it) and my factory unit had a male end on the starter and a female connector on a tiny wire.(I believe this is a hot wire) Can I retain this setup or do I have to cut and strip my wire? I hope this post is clear and explicit enough. Thanks in advance for any advice. I really really really want to reinstall the new starter exactly like the old one was installed.