SVO/Cobra intake gasket set

1bad95 · Oct 12, 2009

I got this felpro kit from autozone...

http://www.autozone.com/autozone/catalog/parts/partsProduct.jsp?displayName=Intake+Manifold+Gasket&itemId=526-0&navValue=15300526&parentId=53-0&productId=231484&fromString=search&itemIdentifier=231484_0_7560_&filterByKeyWord=intakemanifoldgasket&categoryNValue=15399999&isSearchByPartNumber=false&categoryDisplayName=ExternalEngine&store=1159&skuDescription=Felpro/IntakeManifoldGasket&fromWhere=&searchText=intakemanifoldgasket&_requestid=1002101

did i get the right kit? i had them look up a gasket kit for a 95 cobra. box says it fits 93-95 cobra and explorer 5.0 96-01. the little gaskets for the front and rear of the intake arent that cheap cork gasket either, its some sort of rubber like gaskets.

wytstang · Oct 12, 2009

You did good grass hopper.

1bad95 · Oct 12, 2009

awesome thanks again man for all of your help! im gonna go get all the bolts this week and have the measurements for the uppers, do you happen to know how long the lower intake bolts are? id rather get new ones than put the old lowers back in again. also should i go ahead and just use the rubber gasket peices they gave me in the kit for the front and rear or should i use the rtv silicone? sorry for all the questions, just wanna do it right the first time!

thanks again man!

wytstang · Oct 12, 2009

No clue on the lower bolts I would just take 1 or 2 and match it with one. I used the rubber F/R gasket on mine with a dab of rvt on each side. No leaks in 4 or 5 years.

wytstang · Oct 12, 2009

You can also just do some light sanding on the lower bolts and paint them what ever you want.

1bad95 · Oct 12, 2009

ok good deal!! thanks so much man! im hoping to try and maybe do the install this weekend. never done anything like this before, so im not too sure how long it should take me but i hope to get it done!