Mystic SVT
Active Member
- Joined
- May 7, 2010
- Messages
- 473
- Reaction score
- 27
$90 OBOMy export taillights didn't come with the correct harnesses so I ended up making my own out of my existing harnesses. These are not plug and play as you will still have to do some modifying to the car's body harness just like on the 99-04 cars that go to 99-01 cobra tails. I have 2 sets of harnesses and 1 flasher for sale. I left the brake signal wires uncrimped so you can use your connector of choice since you will have to run a 16 gauge wire from both tails to the 3rd brake light harness. I used crimp connectors on mine with a female end on the taillights harness and a male connector on the cars harness.
Here is a pic of one of the harnesses on my car with the female connector I used for it. The male connector is on the car's harness.
Here they are connected to the cars harness...
***These will also work on 99-04 cars with 99-01 cobra tails for you guys that don't have harnesses for your cobra/export tails.
Asking $90 obo for each set and $10 for the flasher which is needed since the stock flasher will not support the extra load.
-Esteban
Here is a pic of one of the harnesses on my car with the female connector I used for it. The male connector is on the car's harness.
Here they are connected to the cars harness...
***These will also work on 99-04 cars with 99-01 cobra tails for you guys that don't have harnesses for your cobra/export tails.
Asking $90 obo for each set and $10 for the flasher which is needed since the stock flasher will not support the extra load.
-Esteban
