Throttle body gasket??????

[94 Bullitt]

So, a friend of my Dads gave me a BBK 75mm T.B. with TPS and IAV for free! Problem is he lost the gasket. Every thing on my GT is stock, and I know everybody says throwing on a big T.B. without changing the heads wont do much, but I still want to throw it on because I can. My questions are what gasket should I use? And I've got a dremmle tool, should I hog out the upper intake a little? I appreciate all the knowledge I can get!

 

[ryclef331]

go to the part store and by a sheet of gasket material. it comes in about an 8x16 sheet. Just trace out the TB pattern on it and cut it out...$7 and you got a gasket.

 

[Schiffy]

or Dallas Mustang Sells a gasket for a TB

 

[97WhitePony]

go to the part store and by a sheet of gasket material. it comes in about an 8x16 sheet. Just trace out the TB pattern on it and cut it out...$7 and you got a gasket.

What he said...

 

[ryclef331]

or Dallas Mustang Sells a gasket for a TB

why pay double for ONE gasket when you can MAKE probably 5 of them and not even wait for shipping!

its a no brainer for me...

 

[wytstang]

Yup make your own.

 

[94Pro-5.0]

go to the part store and by a sheet of gasket material. it comes in about an 8x16 sheet. Just trace out the TB pattern on it and cut it out...$7 and you got a gasket.

thats what i did, couldnt find a replacement gasket.

worked out fine :thumb:

WOOOOHOOOO THE OLD SMILEYS ARE BACK