RAU03MACH
Legend
If you are going to convert to a carb its simple but can be a little more money for the parts
What all do I need?If you are going to convert to a carb its simple but can be a little more money for the parts
ThanksGive me a few ill make a list
Yes a 1994gtThat is a 94 95 correct
Could I use a fuel pressure regulator under the hood or just drop the tank and get a new fuel pump that pushes 5 to 6 PSI5to6 psi fuel pump out side tank close to tank
Remove tank and and remove fuel pump put a straight hose in place of fuel pump
Filter close to carb
You won't need return
Thats the chap way but works
Next wiring
You will only need coolant temp wire , oil psi wire, dist wires , alt wires ,starter wires
Everything else trash it
On the wiring you will go through it carefully and pick out the ones you need unhook the computer trash it
I use the same distributor factory
1 2 or 4 bbl carb
12 or 4 bbl intake
This is a start
Can you explain on the wiring you will go through it carefully and pick out the ones you will need and thank big time for you're knowledge5to6 psi fuel pump out side tank close to tank
Remove tank and and remove fuel pump put a straight hose in place of fuel pump
Filter close to carb
You won't need return
Thats the chap way but works
Next wiring
You will only need coolant temp wire , oil psi wire, dist wires , alt wires ,starter wires
Everything else trash it
On the wiring you will go through it carefully and pick out the ones you need unhook the computer trash it
I use the same distributor factory
1 2 or 4 bbl carb
12 or 4 bbl intake
This is a start
Thank you sirRegulator drop it
Oil psi only one wire in the system
Coolant temp use wire plug in the harness and the sensor there is only one
Distributor wires there will only be 3 you need
Coil wires keep
Altenator wires keep
Starter wires keep
There is one wire you also need to keep
And its by the battery looks like a fuse link round about 1 inch long black
Passenger sideYou have a tfi on the passenger side yes or no
If not its on the distributor
Passenger side
The codes that sang is an e g r which I don't have and low voltage to a pump I'm assuming that was connected to the emissions that I do not have it's like code 327 code 556 + 558 I have the Ford Mercury Lincoln OBD1 code reader not helping me anyOp you put a timing light on it and watched it pull timing? What is it doing? What codes are being thrown?