two easy questions

[sn95gtvert]

first off, after my intake and tb swap i never checked my tps voltage, how are you guys tapping into the wires?

second, my idler pully has been flat topped for sometime now, it still spins nicely but has been making more and more noise over time. where can i get a good quality one that wont brake the bank.

thats all
thanks! :icon_rr:

 

[Miracle]

For the idler: http://mpsautosalvage.com/sunshop/

And on the TPS, find the power wire with your Multi, and ground it through the other wire... should only be 2 wires, if I remember correctly.

 

[sn95gtvert]

they dont have any pullys.
there are 3 wires to the tps, im just wondering how people have probed into them.

 

[toyman]

they dont have any pullys.
there are 3 wires to the tps, im just wondering how people have probed into them.

Use a straight pin or small sewing needle.

 

[rz5.0]

there is three i believe is the middle one for + and top for -

 

[orodi]

Autozone carries the idler pully I have had one on my car for 3 years now. Use pins to tap into the wires. The wires you need to to check is the brown/tan wire for your ground or just use something on the chassis. The other wire (someone correct me if I am wrong please) Is red with a gray/blue stripe however both the red wires go into the same pin.

 

[94 DropTop]

yes any autoparts store will sell the pulley for less than 20 bucks.