Upper Plenum Torque Specs

[NEW EDG]

Just picked up an Accufab upper plenum/TB combo and have all the toque specs except the 5 bolts that mate the upper plenum to the lower intake manifold. Does anyone have a number handy?

Thanks

 

[ttocs]

when ever your not sure just use the number 69. And if its still too loose then it should have been 96.

 

[lwarrior1016]

89 in lbs.

 

[NEW EDG]

89 in lbs.

So like 7.5 ft lbs?

 

[lwarrior1016]

So like 7.5 ft lbs?

Somewhere right around that. They would be fine going to 8, if you only have ft lbs.

 

[07GtS197]

If you’re afraid of overtorquing them you’ll be fine. I normally use the “good n tight” method and haven’t had any issues yet. Just don’t go too crazy and hulk them lol. And don’t use thread locker or you might pull the threads out of the intake. They are pressed in. I had that happen on my 00 Gt when I swapped coils.