v6 tranny ?

[foss_94gt]

any of you v6 guys know if the 94/95 v6 t5 speed tranny is the same as the 94/95 v8 t5 tranny ? thanks

 

[MadStang]

yep it's the same. the 3.8 and 5.0 bellhousing is the same. The only difference is the 94-95 mustangs both v6/gt are considered world class, the 96-98 v6 t5 is not.

 

[foss_94gt]

so the input shaft is the same too?

 

[MadStang]

so long as you get a 94-98 they all have the same input shaft.

 

[foss_94gt]

thanks alot man and ya the tranny im getting is out of a 1994, but i never know they were world class tranny's, i guess you learn something everyday

 

[MadStang]

thanks alot man and ya the tranny im getting is out of a 1994, but i never know they were world class tranny's, i guess you learn something everyday

no problem man, good luck with your project.

 

[Magic]

yep it's the same. the 3.8 and 5.0 bellhousing is the same. The only difference is the 94-95 mustangs both v6/gt are considered world class, the 96-98 v6 t5 is not.

quick question on the bellhousing...it will line up with the 5.0, which is great news for me....what about the starter? will the 5.0 starter bolt up to the 3.8 bellhousing?

EDIT: I found the answer....the starter between the 3.8 and 5.0 is the SAME!

BUT THE QUESTION IS: With the 3.8 bellhousing on to the 5.0, and 3.8/5.0 Starter...the way the starter mounts on the 3.8 bellhousing, will it catch the ringgear on the 10.5 inch clutch the 5.0 uses??

 

[MadStang]

BUT THE QUESTION IS: With the 3.8 bellhousing on to the 5.0, and 3.8/5.0 Starter...the way the starter mounts on the 3.8 bellhousing, will it catch the ringgear on the 10.5 inch clutch the 5.0 uses??

That's beyond my knowledge, but I don't THINK it should be a problem. I'd do a test fit, if you already have the starter then perfect. If not go to napa buy one and test fit it, then return it haha.