Went to track....disappointed

G_94_T · May 8, 2011

Car is a 94 gt 5 speed....ported E7s(by me),1.7 roller rockers ,longtubes and o/r h-pipe,3.08 gear,14* timing,cold air...ive not been to the track in a few years so my driving was WAY off but i was more concerned with my mph...i thought for sure i would trapping at 100mph or close to it....best i could do was [email protected] was cool and dry...traction was an issue though,so there was no powershifting

G_94_T · May 8, 2011

again its been a few years so please dont ask for 60ft times....i know i can improve on the et but mph is more what i was looking at

Rice_slayer · May 8, 2011

That seems pretty normal, nothing wrong with those numbers to me! My bone stock 94' GT at 1500ft above sea level ran a 15.1@92mph with a 2.3 second 60'.

det_riot · May 8, 2011

look pretty close as to what i've seen for people's times. that gear is killing you, but i know full weight our cars are about good for high 13s low 14s

itsblue95 · May 8, 2011

it my not be what you wanted to run but all you can do is go foward from here

G_94_T · May 10, 2011

itsblue95 said:
it my not be what you wanted to run but all you can do is go foward from here

yeah....i guess i was being too optimistic

Venom351R · May 13, 2011

What was your 60 foot time?

G_94_T · May 13, 2011

2.40-2.50.....again my drivin needs VAST improvement.........my old Stang(also a '94 GT) i could cut 2.00-2.10 short times all day long on street tires

Venom351R · May 13, 2011

You should be more concerned about the 60' time more so then the trap speed. You don't have a lot of go fast parts yet and ported or not they are still stock heads. What kind of goals are you aiming for at the track

Bullitt5339 · May 14, 2011

With those 60ft times, you have the ability to cut a full second off your times just by doing minor suspension work, better tires, and some driving practice.

It's completely reasonable to cut 2.0 60ft times on street tires. If you make that your goal, you can watch your times plummet. I bet you'd pick up .7 in the 1/4 if you can get them down to 2.0.