What do you think of this setup?

[auto_x5.0]

I was just wondering what you guys thought of this setup? Or if you can think of anything to add.
-GT40P heads (built)
-E303 cam
-Edelbrock performer intake or Trick Flow street heat
-BBK 70mm tb
-75-150 shot of nitrous (NOS or ZEX)

 

[94darkhorse]

Not bad. Remember all the supporting small stuff.

 

[LAFENATU]

Good setup.

I myself, like NX kits but either way, it is gonna be fast.

Probably 400RWHP with an NX kit.

 

[auto_x5.0]

With GT40Ps what headers do I have to get?

 

[AaRoN]

Setup looks good.

 

[Dark-5.0]

That set up looks like a good one. My brothers got a 95gt with a '00 explorer motor. They came with P heads and gt40 intake so we just through an E cam in it and ported the exhaust ports a little bit and it made 278rwhp with 306rwtq. He had under $1000 in the whole set up since you can find the explorer motors for cheap. He bought his for $600 and it only had 19k on it. See if you can find one of those motors since they already have the heads and intake that you want.

 

[auto_x5.0]

Do you have to run specific headers with the gt40p heads?

 

[9d5-sn95]

yes you have to have ...."special headers" the new FRPP fox shortys i heard will work. i tried the FRPP sn95 shortys and trust me.. THEY DONT WORK!!.. now i have BBK long tubes and love em... you have to have some 90* boots but i can now chang spark plugs with out pulling the headers. seeing is believing.. there was no room for the plug boot on #6, even with a 90* boot, because the gt40p's plug is angled straight out, unlike the e7 heads which are "angled"

[attachment deleted by admin]