Would this be ok

[Sn95Willis]

Would this be an ok Suspension up grade??

03-04 Cobra A-arms
Steeda Upper and lower rear control arms

 

[98_MustangGT]

ask Handz...he knows suspension all around. :santa_afro:

 

[Dalamar]

Yes.
do you really need upper control arms? are your stock arms shot? if not I'd keep them.
the lowers, yes anything is better than the stock rain gutters.

 

[bigjohnson4.6gt]

theres really no major improvements with replacing the upper control arms, might as well keep the stockers

 

[Jrgunn5150]

Reviaxtorres has 03 Cobra arms on the front of his, ask him also.

I never did rear upper's on my car, and never missed them.

 

[TxCobrA98]

im getting some for christmas. they are designed for 9" wheels so if yours are 9" up front, i would get them.

U-turns > J-turns (half a "yuey"....)

 

[Schiffy]

I'm going with Cobra control arms in the front, and either UMI, or Hotchkis adjustable uppers in the rear, with UPR solid lowers, and Maximum motorsports Anti Roll Bar. :snow_cool:

 

[Sn95Willis]

Well if you guys say i only need the lowers then that is what ill go with.. I know some will yes but does it really matter if they are UPR or Steeda or MM??

 

[rgs]

mm makes quality stuff

 

[Jrgunn5150]

Well if you guys say i only need the lowers then that is what ill go with.. I know some will yes but does it really matter if they are UPR or Steeda or MM??

I had Granatelli's, which everyone say's are horrible, but mine were fine for over a year.

 

[OnyxCobra]

I like my Cobra front A arms, they were an inexpensive alternative to tubulars and do a nice job.

 

[Sn95Willis]

Which one is the one i need out of these 2???


http://www.uprproducts.com/shopping/shopexd.asp?id=367


http://www.uprproducts.com/shopping/shopexd.asp?id=369

 

[ga94gt]

Which one is the one i need out of these 2???


http://www.uprproducts.com/shopping/shopexd.asp?id=367


http://www.uprproducts.com/shopping/shopexd.asp?id=369

Either one will be fine. I have the pro series and no complaints here. UPR has great customer service, plus i am sure you will get a discount for being a forum member.

I know Handz will say GOOD LUCK turning but I have not had any problems, but then again he is a stickler for handeling

 

[Sn95Willis]

Good luck turing??? What does he mean by that..

 

[ga94gt]

No idea! But I have not had a problem turning. :snow_cool:

 

[94 DropTop]

what do the cobra a arms do for you?

 

[Jrgunn5150]

what do the cobra a arms do for you?

Give you clearance for wider rims and tires up front.

 

[Hybridbird]

And by default a tighter turning radius.

 

[94 DropTop]

my front rims are only 4in wide so no need :santa_grin: