WTB: 2 rear lower control arm mounting bolts

03DSGGT · Nov 27, 2011

Hey guys, Im looking for 2 lower control arm mounting bolts for a 1996 Mustang GT. The two bolts that hold the control arm to the rear end housing were seized up, so I had to torch them out...looking for two more to replace them..thanks!

MustangChris · Nov 27, 2011

i had to re-use mine. (i have the ones that hold the lower control arms) but you may want to hit up Fastenal or call up Maximum Motorsports.

mikey94gt · Nov 27, 2011

I might have some.... I know I have the bolts to the uppers, which may or may not be the right length. they are yours for the shipping. Shoot me a length measurement and Ill see what I have. (808)781-9636

massacre · Nov 27, 2011

Pretty sure they are the same length.
Unfortunately, I only have one. If I had two I'd give them to you.

chris91 · Nov 28, 2011

I just went through this on mine. Go to Home Depot or Lowes and get you some Grade 8 Bolts and Nuts. I used 4" Long and I want to say 7/16". Just bring your old bolt in with you to figure out the size.

mikey94gt · Nov 28, 2011

If they really are 4" or so, I have a couple that i wont be using anytime soon. In fact, ill send you all the hardware I have for the rear axle mounts, I think I have 4 bolts total.