WTB: 4R70W/4R75W and any automatic swap parts

ScottyDsntKnow · Feb 23, 2013

Swapping from stick to auto, need everything. Trans, harness, computer, shifter, pedals etc... Needs to be a 98+ trans, I know if it is not a 98 and a 99-04 I'll need to do some wiring mods or swap the whole harness which is fine. Let me know what you have, I don't have a problem paying for shipping within the lower 48.

four.six · Feb 23, 2013

Where are you located? I have a 98 GT Auto that I want to switch to a 5spd.

sick_46 · Feb 26, 2013

I have a 6 bolt flex plate. $50 shipped

330CubeGt · Mar 2, 2013

Make sure you buy the auto cross member. I just did the swap in my cobra a few days ago and had to mod the 5 speed cross because it sat to far back.

Ferocious · Mar 2, 2013

I have the entire shifter assembly. $25 + the ride and it's yours.

ScottyDsntKnow · Mar 3, 2013

four.six said:
Where are you located? I have a 98 GT Auto that I want to switch to a 5spd.

I'm in NJ, I've got a lot of the parts already, also my T45 is going to need a rebuild soon. Notchy going into 2nd and it grinds if I try to fast shift. I also have a lot of the parts already but if you are in NJ or near there and need 5 spd stuff I'll make you a good deal when all is said and done.

sick_46 said:
I have a 6 bolt flex plate. $50 shipped

Can you PM or post pics? I got one for free in a box of misc. parts but it was rusted and I am not going to put junk into a car that has 0 rust and garage kept almost all its life.

330CubeGt said:
Make sure you buy the auto cross member. I just did the swap in my cobra a few days ago and had to mod the 5 speed cross because it sat to far back.

I keep seeing the 96-98 crossmembers listed as auto/manual and ebay is just about useless. I guess I'll have to keep looking.

Ferocious said:
I have the entire shifter assembly. $25 + the ride and it's yours.

How much shipped to 08723? Got a shifter out of a 04 coming in with more parts but its going to be slate and not black.

Ferocious · Mar 3, 2013

ScottyDsntKnow said:
How much shipped to 08723? Got a shifter out of a 04 coming in with more parts but its going to be slate and not black.

$40 shipped to your area.

1997gtRioRed · Mar 3, 2013

ScottyDsntKnow said:
Got a shifter out of a 04 coming in with more parts but its going to be slate and not black.

got any pics? looking to sell? i may be interested

ScottyDsntKnow · Mar 4, 2013

It comes in Wednesday so I'll let you know. Still debating on the new edge shifter, the sn95 shifter or just EFF it and get a b&m hammer. Still a little mad at b&m 10 years later after one of their 5 SPD shifters stuck in 5th and stranded me on the highway back in 2003. Had to get towed home for over $100 and then 15 minutes later stock shifter was back in with no issues. 2 steeda tri-axs and a pro 5.0 later and never had that issue again... I do hear good things about the hammer tho...

Sent from my DROID BIONIC using Tapatalk 2

greenscobie86 · Mar 5, 2013

Scotty I have ALMOST everything you need and I'm local in Staten Island NY, come take a ride to my garage and take EVERYTHING you may need. I need the shit gone so I'll cut you a deal.

330CubeGt · Mar 5, 2013

Did you check mps for a harness or do you already have one?

ScottyDsntKnow · Mar 5, 2013

greenscobie86 said:
Scotty I have ALMOST everything you need and I'm local in Staten Island NY, come take a ride to my garage and take EVERYTHING you may need. I need the shit gone so I'll cut you a deal.

If you can PM me or respond in line with what you have that would be great. I am still waiting on the transmission I ordered to ship, seller is taking his sweet time and there is a very real chance UPS will break this one too. Would be nice to pick up all the nickel/dime stuff at once.

330CubeGt said:
Did you check mps for a harness or do you already have one?

I found a 98 automatic trans harness on the evilbays for $50 shipped and ordered it. Either going to run the 98 computer and tune it to turn off PATS or run a baumann US shift and stick with the computer that's in there now. Probably not going to go the Mach1 route.

ScottyDsntKnow · Mar 8, 2013

Sick 46, you have a PM, need that flexplate if you still have it.

justinschmidt1 · Mar 8, 2013

I've got a spare valve body somewhere if u have any interest

Sent from my DROID RAZR using Tapatalk 2

ScottyDsntKnow · Mar 8, 2013

I might if I eff up the J-mod on the one I have coming in but I don't plan on it lol. Got a 4r75w out of an 04 Mach 1 with 16k miles coming in wed/thurs timeframe...