Hello all! I picked up a set of 18x10 wheels yesterday. Does anyone here run 10" wheels on the front of their mustang? I expect rubbing issues without spacers. What size tires are you guys running on the front?
10" wheels
- Thread starter jwhisl
- Start date
Wichers123
Well-Known Member
I run 9.5 with a +38 offset and I run a 1/4 spacer.. Also running a 275 up front
MustangChris
Mythic Level
wow. feel free to post some pics guys. thats some incredible size widths! do they look okay? do they stick out of the fender at all?
Wichers123
Well-Known Member
OnyxCobra
Post Whore
Rubbing issues will depend on the wheel offset and tire size.
Wichers123
Well-Known Member
I only rub at full lock right or left. No rubbing from the tires at all.
it would seem like by the time ya got enough offset you would be out past the fender on a 10" wheel up front. i wanted to do this too when i learned ccw wheels dont come in anything smaller than 10" wide wheels in 20's, lol. dafug?
Wichers123
Well-Known Member
17x10+20would fit perfect a 275 is proper size for 10"
MustangChris
Mythic Level
dang. those sit flush as hell.
Wichers123
Well-Known Member
Yessir that was my goal. I could rock a 1/2" spacer to be perfect. But I don't want to.
Orange 94
Post Whore
Why 10s on the front?
Good luck fitting them.
Good luck fitting them.
MustangChris
Mythic Level
because racecar. thats why.
Wichers123
Well-Known Member
I just showed y'all. The only difference is .5" that's not much of a difference.. Offset is the make it or break it.
98BlackGT
Well-Known Member
rpf1's <3 but back to the subject i have 17x9 and i rub full lock turn as well.
Shifty Powers
Well-Known Member
So do I ^^^ lol
My wheels are about flush, but im running -2 camber .... these are 17x9
For you guys worrying about running a 275... No point in going with a 10'' wide rim.. and giving yourself the possibility of more rubbing
Shifty Powers
Well-Known Member
It is a full orange but yea it has a metallic flake to it. Currently its 3 different colors but its real hard to tell.. Spend plenty of time trying to match lol
unsure of the main color. But one of the colors is Copperhead orange but the main color I will be using now to blend any new parts is actually a Lotus Orange
But yea does have some red in it. Lotus has small metallic flakes, the original color has very large metallic flakes and is hard to duplicate, so each time i get it matched it almost comes out different.
But yea, you shouldnt need to run 10'' up front unless your doing it for the hell of it. If its about tire size, its not needed.
unsure of the main color. But one of the colors is Copperhead orange but the main color I will be using now to blend any new parts is actually a Lotus Orange
But yea does have some red in it. Lotus has small metallic flakes, the original color has very large metallic flakes and is hard to duplicate, so each time i get it matched it almost comes out different.
But yea, you shouldnt need to run 10'' up front unless your doing it for the hell of it. If its about tire size, its not needed.
